Seasonal

Silicone mold for a large Christmas Bauble Trinket Dish. The Trinket Dish is 21.5 x 22.5 cm (8 1/2" x 8 9/10") wide and 18 mm (7/10") thick, including a raised edge of 8 mm (1/3").

Looking for a festive way to stash your holiday treats? Look no further and create your own decorative Christmas dish with this mold! It will be perfect for holding your favorite candies and sweets (warning: may cause an increase in Christmas spirit!).

!! ATTENTION: this mold doesn't have a glossy finish. Use it therefore with Jesmonite, Jesin, A1 and similar products that consist of water-based acrylic hardeners in combination with mineral powders. Pouring with resin will not result in a shiny (glossy) trinket dish, it will have a matte finish.

Silicone mold for a Wall hanging, decorated with Santa, flying through the sky with his Reindeers. The hanging has a diameter of 25 cm (10") and it is 8 mm (1/3") thick. The raised decorative pattern has a thickness of 0.75 mm. The decoration is only part of the hanging, leaving enough room to add a personal text or other decoration.

Deck your hall or porch with a one-of-a-kind Christmas wall hanging! This mold allows you to create and customize your own holiday decoration with text and creativity. Spread some festive cheer and make your walls stand out with your unique and playful piece. (Ho ho ho optional but highly recommended!)

We also have another Christmas wall hanging mold available, decorated with beautiful wrapped Christmas gifts.

Silicone mold for a Wall hanging, decorated with some beautiful wrapped Christmas gifts. The hanging has a diameter of 25 cm (10") and it is 8 mm (1/3") thick. The raised decorative pattern has a thickness of 0.75 mm. The decoration is only part of the hanging, leaving enough room to add a personal text or other decoration.

Deck your hall or porch with a one-of-a-kind Christmas wall hanging! This mold allows you to create and customize your own holiday decoration with text and creativity. Spread some festive cheer and make your walls stand out with your unique and playful piece. (Ho ho ho optional but highly recommended!)

We also have another Christmas wall hanging mold available, decorated with Santa Claus flying through the sky.

Silicone mold for 10 engraved Gingerbread ornaments. The ornaments are between 7.5 (3") and 8 cm (3 1/6") tall and they are 6 mm (1/4") thick.

There are nine different ornaments, the Gnome ornament is double and the candy stick is mirrored.

Silicone mold for 2 large engraved Gingerbread men. The Gingerbread men 20 cm (8") tall and 6 mm (1/4") thick.

We have 2 more molds available, with Gingerbread men of 7.5 cm (3") and 10 cm (4") tall.

Silicone mold for 6 small engraved Gingerbread men. The Gingerbread men are 10 cm (4") tall and 6 mm (1/4") thick.

We have 2 more molds available, with Gingerbread men of 7.5 cm (3") and 20 cm (8") tall.

The video of Claire's Crafty Corner shows how to do the icing lines in the most realistic way.

Silicone mold for 9 extra small engraved Gingerbread men. The Gingerbread men are 7.5 cm (3") tall and 6 mm (1/4") thick.

We have 2 more molds available, with Gingerbread men of 10 cm (4") and 20 cm (8") tall.

Silicone mold for 15 extra extra small Christmas Angels. The angels are 5 cm (2") tall and 6 mm (1/4") thick.

We have 4 more Christmas Angel molds available, with angels varying in size from 7.5 cm (3") to 20 cm (8"). Some of them are also available in a Druzy crystal version.

Silicone mold for 12 extra small Christmas Angels. The angels are 7.5 cm (3") tall and 6 mm (1/4") thick.

We have 4 more Christmas Angel molds available, with angels varying in size from 5 cm (2") to 20 cm (8"). Some of them are also available in a Druzy crystal version.

Silicone mold for a set of 6 large Christmas Baubles with engraved Gnomes. Each bauble is 10 cm (4") wide and 8 mm (1/3") thick. There are three different patterns in the mold, two of each.

We have 4 more Christmas Bauble molds of the same size available (which are 6 mm thick), with holographic color effects, with druzy crystal patterns, with raised decorative patterns and with a smooth surface.

Set of 2 molds for:

• 4 Halloween coasters, featuring a Spiderweb! The coasters are 12.5 cm (5") wide and 8 mm (1/3") thick. The Webdesign is 0.75 mm thick and it will be raised on the surface of the coasters.
• a large Halloween tray, also featuring a Spiderweb! The tray is 30 cm (12") wide and 8 mm (1/3") thick. The Big Web is also 0.75 mm thick and it will be raised on the surface of the tray.

Be a hit at any spooky party with this fun set of spiderweb coasters and tray. With big spiders for extra CREEPYNESS! They make for an eerie decorative combo that's sure to raise the hair on the backs of your guests' necks! Add these to your Halloween decor!

Both molds are also available separately.

Silicone mold for a large Halloween tray, featuring a Spiderweb, with a huge Spider crawling around!

The tray is 30 cm (12") wide and 8 mm (1/3") thick. The Big Web is 0.75 mm thick and it will be raised on the surface of the tray.

There is also a mold available for 4 Spiderweb coasters and both molds are also as a set available, see one of the pictures (for illustrative purposes, this item is only for the spiderweb tray mold).

Silicone mold for 4 Halloween coasters, featuring a Spiderweb! And the spider is still in the web, hunting for a treat!

The coasters are 12.5 cm (5") wide and 8 mm (1/3") thick. The Webdesign is 0.75 mm thick and it will be raised on the surface of the coasters.

There is also a mold available for a large Spiderweb tray, with an even larger Spider, and both molds are also as a set available, see one of the pictures (for illustrative purposes, this item is only for the spiderweb coaster mold).

Silicone mold for a large decorative Pumpkin tray, featuring a Spooky House with some menacing bats! The tray is 28 cm (11") wide, 27 cm (10 2/3") high and 8 mm (1/3") thick. The Spooky House design is 0.75 mm thick and it will be raised on the surface of the tray.

Start your Halloween decorations off on the right foot with this spooky-cool Pumpkin tray! Featuring a large Halloween pumpkin, with a spooky house and even a few bats, it will be a frightful sight and it's the perfect way to get you in the spooky spirit. Boo-tiful!

We also have another mold available for a large Halloween pumpkin tray, featuring a Tombstone Zombie.

Two silicone molds for:

• 4 coasters in the shape of a Pumpkin. The coasters are 12.5 cm (5") wide, 12 cm (4 3/4") tall and 8 mm (1/3") thick.
• a large Pumpkin tray. The tray is 28 cm (11") wide, 27 cm (10 2/3") tall and 8 mm (1/3") thick.

Make your Halloween spooktacular with these 2 molds, perfect for adding a touch of autumnal fun to your seasonal decorations. Trick or treat!

The molds are also available separately.

Silicone mold for a large Pumpkin tray. The tray is 28 cm (11") wide, 27 cm (10 2/3") tall and 8 mm (1/3") thick.

There is also a mold available for 4 Pumpkin coasters and both molds are also as a set available, see one of the pictures (for illustrative purposes, this item is only for the pumpkin tray mold).

Silicone mold for 4 coasters in the shape of a Pumpkin. The coasters are 12.5 cm (5") wide, 12 cm (4 3/4") tall and 8 mm (1/3") thick.

There is also a mold available for a large Pumpkin tray and both molds are also as a set available, see one of the pictures (for illustrative purposes, this item is only for the pumpkin coaster mold).

Silicone mold for 7 Holographic Halloween Pumpkin keychains. The pumpkins are 6 mm (1/4") thick, 5.7 cm (2 1/4") wide and 6 cm (2 1/3") tall. Each pumpkin has its own engraved facial expression and the holographic color effect will transfer to the surface of your resin pumpkin keychains.

There are 2 other versions of the pumpkins available, both without a holographic color effect: a 'Halloween' version with engraved faces and a 'plain' version, without engraved faces. 

One of the pictures shows all 3 molds (for illustrative purposes, this item is only for the 'Holographic Halloween' pumpkin mold).

Silicone mold for 7 Halloween Pumpkin keychains. The pumpkins are 6 mm (1/4") thick, 5.7 cm (2 1/4") wide and 6 cm (2 1/3") tall. Each pumpkin has its own engraved facial expression. 

There are 2 other versions of the pumpkins available, a 'holographic Halloween' version with engraved faces (the holographic color effect will transfer to the surface of your resin pumpkin keychains) and a 'plain' version, without engraved faces and without a holographic color effect. 

One of the pictures shows all 3 molds (for illustrative purposes, this item is only for the 'Halloween' pumpkin mold).

Silicone mold for 7 Pumpkin keychains. The pumpkins are 6 mm (1/4") thick, 5.7 cm (2 1/4") wide and 6 cm (2 1/3") tall.

There are 2 other versions of the pumpkins available, a 'Halloween' version with engraved facial expressions  and a 'holographic Halloween' version with facial expressions (the holographic color effect will transfer to the surface of your resin pumpkin keychains). 

One of the pictures shows all 3 molds (for illustrative purposes, this item is only for the 'normal' pumpkin mold).

Silicone mold for a decorative Halloween shield, featuring an Evil Pumpkin! The shield is 17 cm (6 2/3") wide, 25 cm (10") high and 8 mm (1/3") thick. The decorative design is 0.75 mm thick and it will be raised on the surface of the shield.

This Halloween shield is perfect for those looking to send a chill down their guests' spines! With an evil pumpkin and menacing bats, it's sure to be the spookiest decoration on the block! Hauntingly good fun!

We also have 3 other molds available for a Halloween shield, all with their own decorative design, see one of the the pictures for one of them (for illustrative purposes, this item is only for the 'Evil Pumpkin' shield).

Silicone mold for a decorative Halloween shield, featuring a Black Scary Cat! The shield is 17 cm (6 2/3") wide, 25 cm (10") high and 8 mm (1/3") thick. The decorative design is 0.75 mm thick and it will be raised on the surface of the shield.

Greet trick-or-treaters with this spooktastic Halloween shield! Featuring a scary 'black' cat, bats and a spiderweb, this Halloween decoration is sure to have visitors “cat-tured” in its bewitchment!

We also have 3 other molds available for a Halloween shield, all with their own decorative design, see one of the the pictures for one of them (for illustrative purposes, this item is only for the 'Scary Cat' shield).

BOO!

Silicone mold for 8 Holographic Halloween Ghost keychains. The ghosts are 6 mm (1/4") thick and 6 cm (2 1/3") tall. The width varies by ghost and each ghost has its own engraved facial expression. The holographic color effect will transfer to the surface of your resin ghost keychains!

The mold is also available in a version without the holographic color effect. 

BOO!

Silicone mold for 8 Halloween Ghost keychains. The ghosts are 6 mm (1/4") thick and 6 cm (2 1/3") tall. The width varies by ghost and each ghost has its own engraved facial expression.

The mold is also in a holographic version available (the holographic color effect will  transfer to the surface of your resin ghost keychains)!