Sets

Two silicone molds for:

• a set of four square Kintsugi coasters (Kintsugi is the Japanese art of fixing broken pottery). The coasters are 10 x 10 cm (4" x 4") and 8 mm (1/3") thick.
  
• a holder for the Kintsugi coasters. The holder is large enough for four coasters of 10 x 10 cm (4" x  4") and 8 mm (1/4") thick. You can fix the supports with a drop of glue or resin so that it becomes a solid piece (Tip: place the holder upside down, so that the supports will hang vertically while the glue or resin is drying).

Two silicone molds for in total 12 Holographic Christmas ornaments (set #1 and #2). The ornaments are 5 mm (1/5") thick and between 6.5 cm (2 3/5") and 11 cm (4 1/3") high. The holographic color effect will transfer to the surface of your resin ornaments.

Both molds are also available separately. And we have the molds also in a non-holographic version available.

Set of two silicone molds for four Slate coasters and a matching holder. The slates are approx. 11 x 13 cm (4 1/3" x 5 1/10") and they are 6 mm (1/4") thick. The edges of the coasters and holder are coarsened, for that specific slate look and feel.

There is also a matching oval slate tray available, see one of the pictures (for illustrative purposes, the tray mold is not included in this item).

The molds are also available separately.

Two silicone molds for:

• a set of 4 Cup Coasters. The coasters are 12.5 cm (5") wide, 9 cm (3 1/2") high and 8 mm (1/3") thick.
• a large Cup tray. The tray is 25 cm (10") wide, 18 cm (7") high and 8 mm (1/3") thick.

Both molds are also available separately.

Three silicone molds for:

• a set of four square Kintsugi coasters (Kintsugi is the Japanese art of fixing broken pottery). The coasters are 10 x 10 cm (4" x 4") and 8 mm (1/3") thick.
• a holder for the Kintsugi coasters. The holder is large enough for four coasters of 10 x 10 cm (4" x  4") and 8 mm (1/4") thick. You can fix the legs with a drop of glue or resin so that it becomes a solid piece (Tip: place the holder upside down, so that the supports will hang vertically while the glue or resin is drying).
• a square Kintsugi tray. The tray is 25 x 25 cm (10" x 10") and 8 mm (1/3") thick.

Note: do not apply too thick a dome layer on the legs of the holder, because then they will no longer fit through the slots.

The molds are also available separately.

Two silicone molds for a medium sized 2-tier 'Fantasy' cake stand. The cake stands are 18 cm (7") and 24 cm (9 2/5") wide and 8 mm (1/3") thick. The centers have a hole of 6 mm (1/4") for the cakestand hardware, so no need to drill a hole.

These molds are part of our molds with the Fantasy theme, which further consists of a coaster mold, a coaster holder, 4 trays and a set of 8 medallions, see one of the pictures (for illustrative purposes, this item is only for the small cakestand mold).

We made several of these molds in sets available, for special setprices.

Set of 2 molds:

• a Royal Coaster XL. This supersized coaster is appr. 14.5 x 17 cm (5 2/3" x 6 2/3") and 1.5 cm ( 3/5") thick.
• a round Tealight Candle Holder. The candle holder is 8 cm (3 1/6") wide and 6 cm (2 1/3") high.

Because of the thickness of the Royal coaster, it's possible to create beautiful resin 3D-flowers in it. The candle holder mold is pretty high and therefore very suitable for pouring flowers, for example.

You can also use acrylic resins with this mold, like Jesmonite, Hydroflow and Artestone.

 Both molds are also separately available.

Two silicone molds for:

• a set of two Geode Coasters with rough sides. The coasters are about 14 x 11.5 cm (5 1/2" x 4 1/2") wide and 12 mm (1/2") thick. 
• a Geode tray with rough sides. The tray is about 22 x 26 cm (8 2/3" x 10 1/4") wide and 12 mm (1/2") thick.

This beautiful set of 2 molds will inspire you to explore your creativity and design your very own unique Geode set. The molds are though, thick and sturdy, the tray and coasters have rough sides and a distinct design, like Geode slices, perfect for creating unique works of art. Bring your imagination to life with this exclusive set.

We also have other Rough & Tough molds available, for coasters and trays that all have the same beaten-up look and feel.

Two silicone molds for in total 12 Christmas ornaments (set #1 and #2). The ornaments are 5 mm (1/5") thick and between 6.5 cm (2 3/5") and 11 cm (4 1/3") high.

Both molds are also available separately. And we have the molds also in a holographic version available.

Set of three silicone molds for our trays with the Fantasy theme. The trays are 15 cm (6"), 20 cm (8") and 25 cm (10") wide and 8 mm (1/3") thick.

These three molds are part of our molds with the Fantasy theme, which further consists of a coaster mold, a coaster holder, 1 larger tray, 2 cakestands and a set of 8 medallions.

We made several of these molds in sets available, for special setprices.

Two silicone molds for:

• a set of two square Geode-style coasters with rough sides. The coasters are about 12.5 x 12.5 cm (5" x 5") wide and 12 mm (1/2") thick. The flat surface of each coaster is about 9 x 9 cm (3 1/2" x 3 1/2"). 
• a large Rectangular Geode-style tray with rough sides. The tray is about 18 x 31 cm (7" x 12") wide and 12 mm (1/2") thick.

This beautiful set of 2 molds will inspire you to explore your creativity and design your very own unique set. The molds are though, thick and sturdy, the tray and coasters have rough sides and a distinct natural stone-like design, perfect for creating unique works of art. Bring your imagination to life with this exclusive set.

We also have other Rough & Tough molds available, for coasters and trays that all have the same beaten-up look and feel.

Three silicone molds for a medium size, a large and an XL Trinket Dish. The medium Trinket Dish is 12.5 x 25 cm (5" x 10") wide, the large Trinket Dish is 15 x 30 cm (6" x 12") wide and the XL Trinket Dish is 17.5 x 35 cm (7" x 14") wide.

The Trinket Dishes have two layers, the baselayer is 8 mm (1/3") thick and the raised edge is 6 mm (1/4") high. The dishes are in total 14 mm (just over 1/2") thick.

The raised edge of each dish is along the entire side 5 mm (1/5") narrower than the baselayer, giving the Trinket Dish an elegant appearance!

The molds are also available separately.

Set of two silicone molds for 4 Hexagon coasters and a matching holder. The coasters are from side to side 10 cm (4") wide and 8 mm (1/3") thick. The matching holder can hold four Hexagon coasters of 8 mm thick. The six legs of the holder have to be attached from the bottomside through the slots of the base plate. You can fix the legs with a drop of glue or (UV) resin so that it becomes a solid piece (Tip: place the holder upside down, so that the legs will hang vertically while the glue or resin is drying).

Note: do not apply too thick a dome layer on the legs, because then they will no longer fit through the slots.

These two molds are part of our line of Hexagon molds, which also consists of two hexagon trays, a set of eight hexagon medallions and a set of eight hexagon napkin rings.

There are also two special prized sets of 3 molds available with these two molds, one set with the medium sized hexagon tray and one set with the large hexagon tray.

Both molds are also in a holographic version available, for spectacular color effects on the surface of your resin coasters and holder.

Set of 2 silicone molds for 4 Cascade Geode coasters with a matching tray. The coasters are about 12.5 cm (5") wide and 9 mm (1/3") thick. The tray is about 25 cm (10") wide and 9 mm (1/3") thick. 

The coasters and tray are made up of three layers of 3 mm each. Each layer has the same shape but is slightly smaller than the previous layer, which gives the sides of the coasters and tray a unique cascade-like appearance.

There is also a a smaller Geode tray mold available with the same cascade design.

Set of two silicone molds for our trays with the Fantasy theme. The trays are 20 cm (8") and 25 cm (10") wide and 8 mm (1/3") thick.

These two molds are part of our molds with the Fantasy theme, which further consists of a coaster mold, a coaster holder, 1 smaller tray, 1 larger tray, 2 cakestands and a set of 8 medallions.

We made several of these molds in sets available, for special setprices.

Two silicone molds for:

• a set of two round coasters with rough sides. The coasters have a diameter of 12.5 cm (5") and they are 12 mm (1/2") thick. The flat surface of each coaster is about 9 cm (3 1/2"). 
• a round tray with rough sides. The tray has a diameter of 22.5 cm (9") and it is 12 mm (1/2") thick.

These two molds are thick and rough, and still have a shiny surface! Perfect to create a rock-solid set of coasters and tray that will be a beautiful decoration on any table. With your creativity and inspiration, the possibilities with Resin and Acrylic Resin are endless. Don't be afraid to get rough and tough with these molds, let your imagination run wild!

We also have other Rough & Tough molds available, for coasters and trays that all have the same beaten-up look and feel.

Set of two silicone molds for our trays with the Fantasy theme. The trays are 15 cm (6") and 20 cm (8") wide and 8 mm (1/3") thick.

These two molds are part of our molds with the Fantasy theme, which further consists of a coaster mold, a coaster holder, 2 larger trays, 2 cakestands and a set of 8 medallions.

We made several of these molds in sets available, for special setprices.

Set of 2 silicone molds for 4 Round Geode coasters and a matching holder. The coasters have the same shape as our round Geode trays, but then smaller, they are about 12.5 cm (appr. 5") wide and 8 mm (appr. 1/3") thick. The holder is specifically designed for these coasters.

The molds are also available seperately.

A set with these two molds and a mold for a large round Geode tray of 25 cm (10") is available as well, see one of the pictures (for illustratives purposes, this item is only for the coaster and holder mold).

You insert the legs of the holder from the bottomside through the slots of the base plate and you can fix them with a drop of glue or (UV) resin so that it becomes a solid piece (Tip: place the holder upside down, so that the legs will hang vertically while the glue or resin is drying).

Note: do not apply too thick a dome layer on the legs, because then they will no longer fit through the slots.

Both molds are also in a holographic version available, for spectacular color effects on the surface of your resin coasters and holder!