Coasters

Silicone mold for a set of four Cascade Roman coasters. The coasters are 11 cm (4 1/3") wide and 9 mm (1/3") thick. 

The coasters are made up of three layers of 3 mm each. Each layer is slightly smaller than the previous layer, which gives the sides of the coasters a unique cascade-like appearance.

There is also a Roman tray mold available with the same cascade design, see one of the pictures (for illustrative purposes, this items is only for the coasters mold). Both molds are also available as a set, at a special price.

Silicone mold for two thick Rocky coasters. The coasters are appr. 12.5 cm (5") wide and 2 cm (4/5") thick. The flat surface at the top is appr. 8 cm (3 1/6") wide.

!! ATTENTION: this mold doesn't have a glossy finish. Use it therefore with Jesmonite, Jesin, A1 and similar products that consist of water-based acrylic hardeners in combination with mineral powders. Pouring with resin will not result in a shiny (glossy) set of coasters, they will have a matte finish, as shown in one of the pictures.

Silicone mold for 4 square coasters with a rough tumbled marble look and feel. The coasters are 10 x 10 cm (4" x 4") wide and 1 cm (2/5") thick.

!! ATTENTION: this mold doesn't have a glossy finish. Use it therefore with Jesmonite, Jesin, A1 and similar products that consist of water-based acrylic hardeners in combination with mineral powders. Pouring with resin will not result in a shiny (glossy) set of coasters, they will have a matte finish.

We also have two molds available for a square tumbled marble tray (20 x 20 cm and 30 x 30 cm), see one of the pictures (for illustrative purposes, this item is only for the tumbled marble coasters mold).

Silicone mold for a set of four square coasters with a raised edge and a 'Tetris' pattern. The coasters are 10 x 10 cm (4" x 4") and 8 mm (1/3") thick.

The same sized coasters are also available without a raised edge, these are 6 mm (1/4") thick.

A matching Tetris coaster holder is separately available, which holds 4 coasters, and both the coaster mold and the holder mold are also as a set available, for a special setprice.

To make the Tetris range complete, there is a square 28 x 28 cm (11" x 11") Tetris tray with raised edge in our collection, see some of the pictures (for illustration purposes, this item is only for the coaster mold).

Silicone mold for a set of four coasters, engraved with the Lily Mandala. The coasters are 11.5 cm (4 1/2") wide and 8 mm (1/3") thick.

This holder mold is part of our Lily Mandala line, in which besides this mold are also molds available for a coaster holder, a set of 8 medallions and a tray of 25 cm (10"), as shown in one of the pictures (for illustrative purposes, this item is only for the coaster mold).

The coaster mold and holder mold are also as a set available, for a special setprice.

Silicone mold for a set of four round Cute Christmas coasters. The coasters are 10 cm ( 4") wide, 8 mm (1/3") thick and they are engraved with a bunch of cute Christmas figures. 

There is also a mold available for a matching holder and both molds are also as a set available, see one of the pictures (for illustrative purposes, this item is only for the coaster mold).

The figures in the coasters present themself also in a large 30 cm (12") Christmas tray and in 12 cute Christmas ornaments, for which we have molds available separately.

Silicone mold for a set of four Cascade Pebble coasters. The coasters are 11 cm (4 1/3") wide, 13 cm (5 1/5") high and 9 mm (1/3") thick. 

The coasters are made up of three layers of 3 mm each. Each layer is slightly smaller than the previous layer, which gives the sides of the coasters a unique cascade-like appearance.

There is also a large Pebble tray mold available with the same cascade design, see one of the pictures (for illustrative purposes, this items is only for the coasters mold). Both molds are also available as a set, at a special price.

Silicone mold for a set of four square coasters with an engraved Ocean theme. The  coasters are 10 x 10 cm (4" x 4") and 8 mm (1/3") thick.

There is also a matching coaster holder available, which holds 4 coasters, and a 25 cm (10") square  tray with the same Ocean theme, see one of the pictures (for illustration purposes, this item is only for the coaster mold).

The 3 molds are also in two different sets available (coasters with holder, coasters with holder and tray), for special setprices.

Silicone mold for a set of 4 Holographic Oriental coasters. The coasters are 11.5 cm (4 1/2") wide and 8 mm (1/3") thick.

These coasters have the same shape as our other Oriental coasters, but then with a holographic color effect, which  will transfer to the surface of your resin coasters.

There are also molds available for a holographic Oriental coaster holder and a large holographic Oriental tray, see one of the pictures (for illustrative purposes, this item is only for the holographic coasters mold). We also combined the 3 molds in 2 different available sets, for special setprices.

This mold is also available in a normal version, wihout the holographic color effect.

Silicone mold for a set of four Cascade Round coasters. The coasters are 11 cm (4 1/3") wide and 9 mm (1/3") thick. 

The coasters are made up of three layers of 3 mm each. Each layer is slightly smaller than the previous layer, which gives the sides of the coasters a unique cascade-like appearance.

There is also a large round tray mold available with the same cascade design, see one of the pictures (for illustrative purposes, this items is only for the coasters mold). Both molds are also available as a set, at a special price.

Silicone mold for two Tube coasters. The coasters are 12.5 x 12.5 cm (5" x 5") wide and 1 cm (2/5") thick. The coasters have a flat bottom and the top consists of 5 adjacent tubes.

!! ATTENTION: this mold doesn't have a glossy finish. Use it therefore with Jesmonite, Jesin, A1 and similar products that consist of water-based acrylic hardeners in combination with mineral powders. Pouring with resin will not result in a shiny (glossy) set of coasters, they will have a matte finish, as shown in the pictures.

We also have a mold available for a matching Tube tray, see one of the pictures (for illustrative purposes, this item is only for the Tube coasters mold). Both molds are also available as a set, for a special setprice.

Silicone mold for a set of four oval coasters with a 'Wild Water' effect on the surface. The coasters are 12.5 x 9.5 cm (5" x 3 3/4") wide and 9 mm (1/3") thick. 

Unleash your creativity with our 'Wild Water' oval coasters! These unique coasters feature a rough texture that mimics the wild water effect, adding a bold touch to your drink serving experience.

Silicone mold for a set of four round Easter coasters, featuring Little Thumper with his brothers and sisters! The coasters are 10 cm (4") wide and 8 mm (1/3") thick.

There is also a matching coaster holder available, see one of the pictures (for illustrative purposes, this item is only for the coaster mold). Both molds are also as a set available, for a special setprice.

You can find Little Thumper not only on this mold and the holder mold, he also appears on molds for a large tray, a set of 8 medallions, a tealight candle holder, a flower arranger and an egg holder tray. Everything you need to decorate a table for an Easter breakfast or Easter brunch!