Products

Set of three silicone molds for our trays with the Magical theme. The trays are 15 cm (6"), 20 cm (8") and 25 cm (10") wide and 8 mm (1/3") thick.

These three molds are part of our molds with the Magical theme, which further consists of a coaster mold, a coaster holder mold, an XL tray and a set of 8 medallions.

Some of these molds are also in a set of 2 or 3 molds available, for special setprices.

Three silicone molds for a medium size, a large and an XL round Trinket Dish. The medium Trinket Dish has a diameter of 18 cm (7"), the large Trinket Dish 23 cm (9") and the XL Trinket Dish 28 cm (11").

The Trinket Dishes have two layers, the baselayer is 8 mm (1/3") thick and the raised edge is 6 mm (1/4") high. The dishes are in total 14 mm (just over 1/2") thick.

The raised edge of each dish is along the entire disc 5 mm (1/5") narrower than the baselayer, giving the Trinket Dish an elegant appearance!

The molds are also available separately.

Three silicone molds for a medium size, a large and an XL Trinket Dish. The medium Trinket Dish is 12.5 x 25 cm (5" x 10") wide, the large Trinket Dish is 15 x 30 cm (6" x 12") wide and the XL Trinket Dish is 17.5 x 35 cm (7" x 14") wide.

The Trinket Dishes have two layers, the baselayer is 8 mm (1/3") thick and the raised edge is 6 mm (1/4") high. The dishes are in total 14 mm (just over 1/2") thick.

The raised edge of each dish is along the entire side 5 mm (1/5") narrower than the baselayer, giving the Trinket Dish an elegant appearance!

The molds are also available separately.

Set of three silicone molds for our trays with the Oriental theme. The trays are 15 cm (6"), 20 cm (8") and 25 cm (10") wide and 8 mm (1/3") thick.

These three molds are part of our molds with the Oriental theme, which further consists of a coaster mold, a coaster holder mold, an XL tray and a set of 8 medallions.

Some of these molds are also in a set of 2 or 3 molds available, for special setprices.

Two silicone molds for:

• 4 Oval coasters. The coasters are 9.5 x 12.5 cm (3 3/4" x 5") wide and 8 mm (1/3") thick.
• a holder for these oval coasters. The holder is 12.5 x 16.5 cm (5" x 6 1/2") wide and 8 mm (1/3") thick. You can fix the supports of the holder with a drop of glue or resin so that it becomes a solid piece (Tip: place the holder upside down, so that the supports will hang vertically while the glue or resin is drying).
• a large Oval tray. The tray is 17 x 25 cm (6 2/3" x 9 5/6") wide and 1 cm (2/5") thick.

Note: do not apply too thick a dome layer on the supports of the holder, because then they will no longer fit through the slots.

There is also a mold available for an XL oval tray and all molds are also available engraved with thin 'Graceful lines'.

Three silicone molds for:

• 4 Oval coasters, engraved with thin graceful lines. The coasters are 9.5 x 12.5 cm (3 3/4" x 5") wide and 8 mm (1/3") thick.
• a holder for these oval coasters. The holder is 12.5 x 16.5 cm (5" x 6 1/2") wide, the baseplate is 8 mm (1/3") thick and it is engraved with thin graceful lines. You can fix the supports of the holder with a drop of glue or resin so that it becomes a solid piece (Tip: place the holder upside down, so that the supports will hang vertically while the glue or resin is drying).
• a large Oval tray. The tray is 17 x 25 cm (6 2/3" x 9 5/6") wide, 1 cm (2/5") thick and it is engraved with thin graceful lines.

Note: do not apply too thick a dome layer on the supports of the holder, because then they will no longer fit through the slots.

Set of 3 silicone molds for 4 Round Geode coasters with a matching holder and a large round Geode Tray. The coasters have the same shape as the tray and they are about 12.5 cm (appr. 5") wide and 8 mm (appr. 1/3") thick. The holder is specifically designed for these coasters. The Geode tray is 25 cm (10") wide and 10 mm (2/5") thick. 

You insert the legs of the holder from the bottomside through the slots of the base plate and you can fix them with a drop of glue or (UV) resin so that it becomes a solid piece (Tip: place the holder upside down, so that the legs will hang vertically while the glue or resin is drying).

Note: do not apply too thick a dome layer on the legs, because then they will no longer fit through the slots.

The molds are also separately available.

Three silicone molds for:

• a set of 4 Scallop coasters. The coasters are 12.5 cm (5") x 11 cm (4 1/3") and 8 mm (1/3") thick.
• a mold that can serve as a holder mold for the Scallop coasters and also as a small tray mold. The scallop is 16.5 cm (6.5") x 14.5 cm (5 2/3") and 8 mm (1/3") thick .
  The two small scallops are meant to be used as stands on the tray, to create a holder for the scallop coasters and they can for instance be fixed with glue, resin or in a toplayer.
• a large Scallop tray. The tray is 25 cm (10") x 22.5 cm (9") and 8 mm (1/3") thick.

There are also Scallop molds available for an XL tray and for medallions, see some of the pictures (for illustrative purposes, this item is only for the coaster mold with holder and large tray mold).

Three silicone molds for:

• a set of four Slate coasters. The coasters are appr. 11 x 13 cm (4 1/3"x 5 1/10") and 6 mm (1/4") thick.
• a holder for the Slate coasters. 
• a large oval Slate tray. The tray is 30 cm x 22.5 cm (12" x 8 4/5") large and 8 mm (1/3") thick.

The edges of the coasters, holder and tray are coarsened, for that specific slate look and feel.

The molds have a smooth surface, the 'crushed ice' effect that is shown in one of the pictures, is made with some of our inlay molds, which are available separately.

Three silicone molds for:

• a set of four square coasters with an engraved Ocean theme. The coasters are 10 x 10 cm (4" x 4") and 8 mm (1/3") thick.
  
• a holder for the Ocean coasters. The holder is large enough for four coasters of 10 x 10 cm (4" x  4") and 8 mm (1/4") thick. You can fix the legs with a drop of glue or resin so that it becomes a solid piece (Tip: place the holder upside down, so that the supports will hang vertically while the glue or resin is drying).
• a square Ocean tray. The tray is 25 x 25 cm (10" x 10") and 8 mm (1/3") thick.

Set of 5 silicone inlay molds with the Crushed Ice pattern. The 'Island' mold is 15.5 x 21 cm (6" x 8 1/4") at the widest parts and the round inlay molds are 8 cm (3 1/6").

All molds are about 4 mm (1/6") thick and the round molds will fit in (almost) any coaster mold.

Silicone mold for a set of 6 Holographic Decoration eggs, that can be used to decorate Easter branches and such. The eggs are 9 cm (3 1/2") tall and 6 mm (1/4") thick. The holographic color effect will transfer to the surface of your resin creations.

We also have molds for smaller and larger decoration eggs and a tray in our collection.

Silicone mold for a set of 8 Decoration eggs. The eggs are 9 cm (3 1/2") tall and 6 mm (1/4") thick.

With this mold it will be a breeze to make beautiful decorations, for instance for an Easter branch or tree.

We also have molds for larger decoration eggs and a tray in our collection and a holographic egg mold.

Silicone mold for four Slate coasters. The size of the coasters is approx. 11 x 13 cm (4 1/3" x 5 1/10") and they are 6 mm (1/4") thick. The edges of the coasters are coarsened, for that specific slate look and feel.

The coasters have a smooth surface, the 'crushed ice' effect that is visible in one of the pictures, is made with a set of inlay molds (separately available).

We also have a holder mold available that is specifically designed to hold 4 slate coasters, as shown in one of the pictures. Both molds are also available as a set, for a special setprice.

Silicone mold for a slim XL Trinket Dish. The Trinket Dish is 12.5 x 37.5 cm (5" x 15") wide and it has two layers. The baselayer is 8 mm (1/3") thick and the raised edge is 6 mm (1/4") high. The dish is in total 14 mm (just over 1/2") thick.

The raised edge is along the entire side 5 mm (1/5") narrower than the baselayer, giving the dish an elegant appearance!

We also have molds available for round and rectangular shaped Trinket Dishes, see some of the pictures (for illlustrative purposes, this item is only for the slim Trinket Dish).