Products

Three silicone molds for a large 3-tier cake stand, engraved with the Peacock Mandala. The cake stands are 18 cm (7"), 24 cm (9 2/5") and 30 cm (11 4/5") wide and 8 mm (1/3") thick. The centers have a hole of 6 mm (1/4") for the cakestand hardware, so no need to drill a hole.

The molds are part of our 'Peacock Mandala' design line, in which besides these molds are also a set of four coasters, a coaster holder and a mold for 8 medallions.

Silicone mold for a Square tray of 30 x 30 cm (12" x 12") wide and 1 cm (2/5") thick.

We also have a square mold available in 20 x 20 cm (8" x 8") and 25 x 25 cm (10" x 10").

Silicone mold for 9 Christmas ornaments, in 3 different shapes: Balls, Stars and Bells. Each ornament is about 7.5 cm (3") wide and 8.5 cm (3 1/3") high. They are 6 mm (1/4") thick.

The same ornaments are also available with a holographic color effect, that will transfer to the surface of your resin Christmas ornaments.

Silicone mold for 9 Holographic Christmas ornaments, in 3 different shapes: Balls, Stars and Bells. Each ornament is about 7.5 cm (3") wide and 8.5 cm (3 1/3") high. The ornaments are 6 mm (1/4") thick and they have a holographic color effect, that will transfer to the surface of your resin Christmas ornaments.

We also have a mold available for the same ornaments, but then without the holographic color effect.

Silicone mold for 6 Christmas ornaments. The ornaments are 5 mm (1/5") thick and between 6.5 cm (2 3/5") and 11 cm (4 1/3") high.

This mold is for set #1, there is also a set #2 available and both molds are also available as a set of 2 molds, for a special setprice. One of the pictures shows both molds (for illustrative purposes, this item is only for set #1).

We have this mold also in a holographic version available.

Silicone mold for 6 Christmas ornaments. The ornaments are 5 mm (1/5") thick and between 6.5 cm (2 3/5") and 11 cm (4 1/3") high.

This mold is for set #2, there is also a set #1 available and both molds are also available as a set of 2 molds, for a special setprice. One of the pictures shows both molds (for illustrative purposes, this item is only for set #2).

We have this mold also in a holographic version available.

Silicone mold for 6 Holographic Christmas ornaments. The ornaments are 5 mm (1/5") thick and between 6.5 cm (2 3/5") and 11 cm (4 1/3") high. The holographic color effect will transfer to the surface of your resin ornaments.

This mold is for set #1, there is also a set #2 available and both molds are also available as a set of 2 molds, for a special setprice. One of the pictures shows both molds (for illustrative purposes, this item is only for set #1).

We have this mold also in a non-holographic version available.

Silicone mold for 6 Holographic Christmas ornaments. The ornaments are 5 mm (1/5") thick and between 7 cm (2 3/4") and 9.5 cm (3 3/4") high. The holographic color effect will transfer to the surface of your resin ornaments.

This mold is for set #2, there is also a set #1 available and both molds are also available as a set of 2 molds, for a special setprice. One of the pictures shows both molds (for illustrative purposes, this item is only for set #2).

We have this mold also in a non-holographic version available.

Silicone mold for 12 Hearts! Each heart is 8 cm (3 1/6") wide, 7.5 cm (3/10") high and 8 mm (1/3") thick.

Spread the love with a Dozen Hearts! Show your beloved wedding guests your appreciation with a unique gift and create lasting memories on your special day. These hearts will spread love and joy throughout your celebration (overload of love not guaranteed but highly probable!) They are also a perfect addition for any wedding table, garden party or mothers Day.

Silicone mold for a large oval tray, engraved with daisies. The oval tray has the shape of an egg, it's 28 cm (11") tall, 20 cm (8") wide and 8 mm (1/3") thick. 

Other engraved oval tray molds in our botanical collection are the narcissus tray and the wild flowers tray, see one of the pictures (for illustrative purposes, this item is only for the mold with the daisies).

Silicone mold for a large oval tray, engraved with narcissuses. The oval tray has the shape of an egg, it's 28 cm (11") tall, 20 cm (8") wide and 8 mm (1/3") thick. 

Other engraved oval tray molds in our botanical collection are the daisies tray and the wild flowers tray, see one of the pictures (for illustrative purposes, this item is only for the mold with narcissuses).

Silicone mold for a large oval tray, engraved with wild flowers. The oval tray has the shape of an egg, it's 28 cm (11") tall, 20 cm (8") wide and 8 mm (1/3") thick. 

Other engraved oval tray molds in our botanical collection are the daisies tray and the narcissus tray, see one of the pictures (for illustrative purposes, this item is only for the wild flowers mold).

Silicone mold for a Business Card holder with a Holographic Broken Glass pattern. The holographic color effect will transfer to the surface of your resin card holder. The holder is 5 mm (1/5") thick and 70 mm (2 3/4") wide, suitable for landscape Business Cards (European and American dimensions).

The same design is also available in a smooth version, without pattern.

Silicone mold for a large cake stand, engraved with the Peacock Mandala. The cake stand is 30 cm (11 4/5") wide and 8 mm (1/3") thick. The center has a hole of 6 mm (1/4") for the cakestand hardware, so no need to drill a hole.

The large cake stand mold is part of our 'Peacock Mandala' design line, in which besides this mold are also two smaller cake stands (to make a 2-tier or 3-tier cake stand), a set of four coasters, a coaster holder and a mold for 8 medallions.

This mold is also available in several sets, for a special setprice. 

Silicone mold for a medium sized 'Fantasy' cake stand. The cake stand is 24 cm (9 2/5") wide and 8 mm (1/3") thick. The center has a hole of 6 mm (1/4") for the cakestand hardware, so no need to drill a hole.

This mold is one of our molds with the Fantasy theme, which further consists of a coaster mold, a coaster holder, 4 trays, one smaller cakestand and a set of 8 medallions, see one of the pictures (for illustrative purposes, this item is only for the medium sized cakestand mold).

We made several of these molds in sets available, for special setprices.

Silicone mold for a medium sized cake stand, engraved with the Peacock Mandala. The cake stand is 24 cm (9 2/5") wide and 8 mm (1/3") thick. The center has a hole of 6 mm (1/4") for the cakestand hardware, so no need to drill a hole.

The medium sized cake stand mold is part of our 'Peacock Mandala' design line, in which besides this mold are also a smaller and a larger cake stand (to make a 2-tier or 3-tier cake stand), a set of four coasters, a coaster holder and a mold for 8 medallions.

This mold is also available in several sets, for a special setprice. 

Silicone mold for a small 'Fantasy' cake stand. The cake stand is 18 cm (7 1/2") wide and 8 mm (1/3") thick. The center has a hole of 6 mm (1/4") for the cakestand hardware, so no need to drill a hole.

This mold is one of our molds with the Fantasy theme, which further consists of a coaster mold, a coaster holder, 4 trays, one larger cakestand and a set of 8 medallions.

We made several of these molds in sets available, for special setprices.

Silicone mold for a small cake stand, engraved with the Peacock Mandala. The cake stand is 18 cm (7") wide and 8 mm (1/3") thick. The center has a hole of 6 mm (1/4") for the cakestand hardware, so no need to drill a hole.

The small cake stand mold is part of our 'Peacock Mandala' design line, in which besides this mold are also two larger cake stands (to make a 2-tier or 3-tier cake stand), a set of four coasters, a coaster holder and a mold for 8 medallions.

This mold is also available in several sets, for a special setprice. 

Silicone mold for a set of four Cascade Daisy coasters. The coasters are 12 cm (4 3/4") wide and 9 mm (1/3") thick. 

The coasters are made up of three layers of 3 mm each. Each layer is slightly smaller than the previous layer, which gives the sides of the coasters a unique cascade-like appearance.

There is also a Daisy tray mold available with the same cascade design, see one of the pictures (for illustrative purposes, this items is only for the coasters mold).

Silicone mold for a large Cascade Daisy tray. The tray is 26 cm (10 1/4") wide and 9 mm (1/3") thick. 

The tray is made up of three layers of 3 mm each. Each layer is slightly smaller than the previous layer, which gives the sides of the tray a unique cascade-like appearance.

There is also a Daisy coaster mold available with the same cascade design, see one of the pictures (for illustrative purposes, this items is only for the tray mold).