All molds

Silicone mold for a large decorative Pumpkin tray, featuring a Tombstone Zombie! The tray is 28 cm (11") wide, 27 cm (10 2/3") high and 8 mm (1/3") thick. The Tombstone design is 0.75 mm thick and it will be raised on the surface of the tray.

Add some spooky fun to your Halloween decoration with your homemade Pumpkin tray featuring a Tombstone Zombie design. It will be a frightful sight and it's the perfect way to get you in the spooky spirit. Boo-tiful!

We also have another mold available for a large Halloween pumpkin tray, featuring a Spooky House.

Two silicone molds for a large and an XL round Trinket Dish. The large Trinket Dish has a diameter of 23 cm (9") and the XL Trinket Dish has a diameter of 28 cm (11").

Both Trinket Dishes have two layers, the baselayer is 8 mm (1/3") thick and the raised edge is 6 mm (1/4") high. The dishes are in total 14 mm (just over 1/2") thick.

The raised edge of each dish is along the entire disc 5 mm (1/5") narrower than the baselayer, giving the Trinket Dish an elegant appearance!

The molds are also available separately.

Silicone mold for a set of eight decorative (napkin ring) medallions, with our Oriental  shape. Each medallion is 5.5 cm (2 1/6") wide and 8 mm (about 1/3") thick.

This medallion mold can be used together with our mold for the (napkin) rings, which is especially designed to form the base for these medallions. Together they make a unique napkin ring.

This mold is one of our molds with the Oriental theme, which further consists of a coaster mold, a coaster holder mold and 4 trays, see one of the pictures for some of them (for illustrative purposes, this item is only for the medallion mold).

Some of these molds are also in a set of 2 or 3 molds available, for special setprices.

Silicone mold for a Decorative Christmas ornament with a Christmas tree. The ornament is 15 cm (6") tall, 11 cm (4 1/3") wide and 6 mm (1/4") thick. The Christmas tree design is 0.75 mm thick and it will be raised on the surface of the ornament.

We have 2 more Decorative ornament molds of the same size available, one with a Snowflake and one with a Curls design, see one of the pictures (for illustrative purposes, this item is only for the Decorative Christmas tree mold). The three ornament molds are also as a set of 3 molds available, for a special setprice.

Silicone mold for a thick square block. The block is 25 x 25 cm (10" x 10") wide, 2 cm (4/5") thick and the mold has a smooth and shiny finish.

This square mold is suitable for deep pour projects, like flower preservation. We also have a deep pour square mold available in 15 x 15 cm (6" x 6") and in 20 x 20 cm (8" x 8").

Silicone mold for a set of eight Holographic Magical (napkin ring) medallions. Each medallion is 5.5 cm (2 1/6") wide and 8 mm (about 1/3") thick. 

These medallions are the same as our normal Magical medallions, but then with a holographic color effect, which  will transfer to the surface of your resin medallions.

This medallion mold can be used together with our mold for the (napkin) rings, which is especially designed to form the base for these medallions. Together they make a unique napkin ring.

Silicone mold for a holder for our Magical coasters.

The legs of the holder are 42 mm (1 2/3") tall and you insert them from the bottomside through the slots of the base plate. You can fix the legs with a drop of glue or (UV) resin so that it becomes a solid piece (Tip: place the holder upside down, so that the legs will hang vertically while the glue or resin is drying).

Note: do not apply too thick a dome layer on the legs, because then they will no longer fit through the slots.

This mold is one of our molds with the Magical theme, which further consists of a coaster mold, 4 trays and a set of 8 medallions, see one of the pictures (for illustrative purposes, this item is only for the coaster holder mold).

Some of these molds are also in a set of 2 or 3 molds available, for special setprices.

The holder mold is also available in a Holographic version.

Note: do not apply too thick a dome layer on the legs, because then they will no longer fit through the slots.

Besides these two molds there are also Lily Mandala molds available for a set of 8 medallions, a tray of 25 cm (10") and an XL tray of 35.5 cm (14"), as shown in one of the pictures (for illustrative purposes, this item is only for the coaster and holder mold).

Silicone mold for an Easter Flower Arranger, to arrange that beautiful, but small bouquet of daffodils in the only (too large) vase that you have! The finishing touch on each beautifully decorated Easter breakfast table.

The Flower Arranger is 17 cm (6 2/3") wide and 8 mm (1/3") thick, featuring Little Thumper with his brothers and sisters!

You can find Little Thumper not only on this mold, he also appears on molds for a set of 4 coasters, a matching coaster holder, a large tray, a set of 8 medallions, a tealight candle holder and an egg holder. Everything you need to decorate a table for an Easter breakfast or Easter brunch!

Silicone mold for a large Easter tray, featuring Little Thumper with his brothers and sisters! The tray is 30.5 cm (12") wide and 8 mm (1/3") thick.

You can find Little Thumper not only on this large tray, he also appears on molds for a set of 4 coasters, a matching coaster holder, a set of 8 medallions, a tealight candle holder, a flower arranger and an egg holder tray. Everything you need to decorate a table for an Easter breakfast or Easter brunch!

Silicone mold for a large oval tray, engraved with daisies. The oval tray has the shape of an egg, it's 28 cm (11") tall, 20 cm (8") wide and 8 mm (1/3") thick. 

Other engraved oval tray molds in our botanical collection are the narcissus tray and the wild flowers tray, see one of the pictures (for illustrative purposes, this item is only for the mold with the daisies).

Four silicone inlay molds for Square coasters. The molds are 9 cm (3 1/2") wide and they are a perfect match for our mold for 10 cm (4") square coasters. And because the inlay molds are appr. 4 mm (1/6") thick, your result will be a coaster with a raised edge and a beautiful engraved surface.

We also have a few other square inlay molds available with a different pattern, see one of the pictures.

Silicone mold for a medium sized 'Fantasy' cake stand. The cake stand is 24 cm (9 2/5") wide and 8 mm (1/3") thick. The center has a hole of 6 mm (1/4") for the cakestand hardware, so no need to drill a hole.

This mold is one of our molds with the Fantasy theme, which further consists of a coaster mold, a coaster holder, 4 trays, one smaller cakestand and a set of 8 medallions, see one of the pictures (for illustrative purposes, this item is only for the medium sized cakestand mold).

We made several of these molds in sets available, for special setprices.

Silicone inlay mold with an engraved 'Mermaid circles' pattern. The mold is 15.5 cm (6 1/10 ") wide and no less than 5.5 mm (1/5") thick, with a straight edge. Therefore it's quite easy to make a tray with raised edge when this inlay mold is used in another larger and deeper round(ish) mold.

There are also two other sizes available, 19.8 cm (7 4/5") and 24 cm (9 2/5").

Silicone mold for 3 Door Hangers, openings to the right. The Door Hangers are 8 cm (3 1/8") wide, 21 cm (8 1/4") tall and 8 mm (1/3") thick.

This mold creates three decorative door hangers with hooks that open to the right. Their smooth surfaces give you plenty of freedom to experiment with colour combinations, glitter, inclusions and personalised designs. Perfect for festive décor, room signs or thoughtful handmade gifts.

We also offer a mold for door hangers with hooks opening to the left. Both molds are also available together as a set, at a special set price.

Silicone mold for a small Lavatera Flower Tray. The tray is 17.5 cm (6 9/10") wide, 16 cm (6 3/10") high and 8 mm (1/3") thick.

Inspired by the graceful shape of a Lavatera flower, this small tray brings a delicate floral touch to your creations. The subtle engraved details add depth and definition to the petals without overpowering your design. Experiment with transparent colours, soft gradients, glitter or real dried flowers to create your own unique decorative tray.

This mold is part of our Lavatera Flower Collection, which includes trays in three different sizes and a mold for four Lavatera coasters. The tray molds are also available in several money-saving sets.

Silicone mold for 3 Door Hangers, each engraved with a unique Nutcracker Doll. The Door hangers are 8 cm (3 1/8") wide, 21 cm (8 1/4") tall and 8 mm (1/3") thick.

Bring festive charm to every door with this mold for three Christmas door hangers. Each hanger features its own adorable Nutcracker design, perfect for creating decorative Christmas pieces, from elegant colour combinations to bold glitter-filled creations.

Make them for your own festive décor or turn them into unique handmade gifts. Three designs, three times the Christmas fun!

Silicone mold for an XL tray with the Lily Mandala engraved into it. The tray is 35.5 cm (14") wide and 8 mm (1/3") thick.

The tray mold is part of our Lily Mandala line, which also includes a set of 4 coasters, a coaster holder, a large Lily tray and a set of 8 medallions, as shown in one of the pictures (for illustrative purposes, this item is only for the XL Mandala tray mold).

Silicone mold for an XL Flower Tray, shaped as a Poppy. The tray is 35.5 cm (14") wide, 27.5 cm (10 4/5") high and 8 mm (1/3") thick. The petals are delicately engraved.

Go big and let your creativity bloom! The XL Poppy Tray is a showstopper. Measuring an impressive 14" wide, this oversized floral beauty gives you all the space you need to go wild with color, texture, and imagination. Whether you're creating an eye-catching centerpiece, a dazzling serving tray, or a breathtaking piece of wall art, this mold gives you the canvas to make a serious statement.

The mold is part of our Poppy collection, which also includes molds for coasters, for 9 ornaments and for two smaller trays.

Silicone mold for a large Flower Tray, shaped as a Poppy. The tray is 25 cm (10") wide, 18.5 cm (7 1/4") high and 8 mm (1/3") thick. The petals are delicately engraved.

Make a bold botanical statement with our large Poppy Tray mold! The elegant floral tray is a real eye-catcher. Whether you're crafting an artistic serving tray, a luxury gift, or a vibrant piece of resin art, this mold gives you space to dream big. Let your creativity bloom and turn any space into a field of poppies!

The mold is part of our Poppy collection, which also includes molds for coasters, for 9 ornaments and for a smaller tray.

Silicone mold for an Art panel, titled Horizon. The panel is 20 x 20 cm (8"x 8") wide and 15 mm (3/5") thick. 

Add an artistic touch to your interior with our 'Horizon' Wall Art Panel. Perfect for elevating any interior (wall) decoration, this mold allows you to unleash your creative side. Don't settle for boring walls, express yourself and create a unique addition to your home!

!! ATTENTION: this mold doesn't have a glossy finish. Use it therefore with Jesmonite, Jesin, A1 and similar products that consist of water-based acrylic hardeners in combination with mineral powders. Pouring with resin will not result in a shiny (glossy) panel, it will have a matte finish.

We  also have other molds available to create (wall) Art panels, some of them are shown in one of the pictures (for illustrative purposes, this item is only for the 'Horizon' mold). These panels all have the same width of 20 x 20 cm and thickness may vary.

Silicone mold for a square Holographic tray with a decorative lead glass 'Daisy bud' pattern. The surface of the tray has a holographic finish, which will result in beautiful shifting color effects on your resin tray.

The tray is 24.5 cm x 24.5 cm (9 3/5" x 9 3/5") wide and in total almost 9 mm (1/3") thick. The 'Daisy bud' pattern is 0.75 mm thick and it will be raised on the surface of the tray.

There is also a normal version of the same tray design available, without the holographic color effects. And both versions of this 'Daisy bud' pattern are also available as 5 mm (1/5") thick inlay molds, for our 1 cm and 2 cm deep square tray molds.

Three silicone molds for:

• 4 Oval coasters. The coasters are 9.5 x 12.5 cm (3 3/4" x 5") wide and 8 mm (1/3") thick.
• a holder for these oval coasters. The holder is 12.5 x 16.5 cm (5" x 6 1/2") wide and 8 mm (1/3") thick. You can fix the supports of the holder with a drop of glue or resin so that it becomes a solid piece (Tip: place the holder upside down, so that the supports will hang vertically while the glue or resin is drying).
• a large Oval tray. The tray is 17 x 25 cm (6 2/3" x 9 5/6") wide and 1 cm (2/5") thick.

Note: do not apply too thick a dome layer on the supports of the holder, because then they will no longer fit through the slots.

There is also a mold available for an XL oval tray and all molds are also available engraved with thin 'Graceful lines'.

Three silicone molds for:

• a set of four square coasters with an engraved Ocean theme. The coasters are 10 x 10 cm (4" x 4") and 8 mm (1/3") thick.
  
• a holder for the Ocean coasters. The holder is large enough for four coasters of 10 x 10 cm (4" x  4") and 8 mm (1/4") thick. You can fix the legs with a drop of glue or resin so that it becomes a solid piece (Tip: place the holder upside down, so that the supports will hang vertically while the glue or resin is drying).
• a square Ocean tray. The tray is 25 x 25 cm (10" x 10") and 8 mm (1/3") thick.