All molds

Silicone square inlay mold with a Holographic decorative lead glass 'Daisy bud' pattern. The mold is 18 x 18 cm (7" x 7") wide and 5 mm (1/5") thick. The 'Daisy bud' pattern is 0.75 mm deep.

This inlay mold will make a great combination together with our 20 x 20 cm (8" x 8") large tray molds of 1 cm (2/5") and 2 cm (4/5") thickness. Using the two molds together will create a tray with a raised edge of 5 mm (1/5").

There is also a larger normal version of this inaly mold available, without the holographic color effect. And we also have 8 mm (1/3") tray molds with this 'Daisy bud' pattern available, in a normal and in a holographic version.

Silicone mold for a set of four square coasters with an engraved Ocean theme. The  coasters are 10 x 10 cm (4" x 4") and 8 mm (1/3") thick.

There is also a matching coaster holder available, which holds 4 coasters, and a 25 cm (10") square  tray with the same Ocean theme, see one of the pictures (for illustration purposes, this item is only for the coaster mold).

The 3 molds are also in two different sets available (coasters with holder, coasters with holder and tray), for special setprices.

Silicone mold for an (Easter) Egg holder, featuring Little Thumper with his brothers and sisters! The egg holder is 20 cm (8") wide and 8 mm (1/3") thick, it can store up to 6 eggs.

The center has a hole of 6 mm (1/4"), which makes it easy to attach cakestand hardware to the holder and turn it into an even more decorative tray.

You can find Little Thumper not only on this egg holder, he also appears on molds for a set of 4 coasters, a matching coaster holder, a large tray, a set of 8 medallions, a flower arranger and a tealight candle holder. Everything you need to decorate a table for an Easter breakfast or Easter brunch!

Four silicone inlay molds for Hexagon coasters. The molds measure 9 cm (3 1/2") from side to opposite side and they are a perfect match for our mold for 10 cm (4") Hexagon coasters. And because the inlay molds are appr. 4 mm (1/6") thick, your result will be a Hexagon coaster with a raised edge and a beautiful engraved surface.

We also have a few other Hexagon inlay molds available with a different pattern, see one of the pictures.

And this 'Mikado' pattern is also available for round and square coasters, see one of the pictures (for illustrative purposes, this item is only for the hexagon inlay molds).

Silicone mold for a large Geode tray with Crushed Ice effect. The tray is 25 cm wide (10") and has a raised edge.

There is also a mold for an identical larger tray, which is 35 cm wide (14"), and a set of Geode coasters with the same Crushed Ice effect and raised edges, see the pictures (for illustrative purposes, this item is only for the large tray mold).

Silicone inlay mold with an engraved Mandala. The mold is 24 cm (9 2/5 ") wide and appr. 4 mm (1/6") thick, with a straight edge.

The thickness of this inlay mold makes it easy to create a tray with raised edge, by using a larger and deeper round(ish) mold, for instance our 25 cm (10") or 35 cm (14") large disc molds.

We have several other engraved Mandala inlay molds of 24 cm (9 2/5") available, see the pictures for a few (for illustrative purposes, this item is only for Mandala #2).

Create an elegant statement piece with this handmade silicone mold for a large Lavatera Flower Tray. The flowing flower shape and delicate engraved petal details give every casting a refined botanical look with beautiful visual depth.

The generous surface makes this large flower tray silicone mold for resin ideal for experimenting with bold colour combinations, layered effects, metallic pigments, dried flowers and eye-catching inclusions. Use the finished piece as a decorative centrepiece, serving tray or as the foundation for an impressive tiered cake stand.

This mold is part of our Lavatera Flower Collection, which includes trays in three different sizes as well as a matching mold for four Lavatera coasters. Several money-saving mold sets are also available, making it easy to build a coordinated floral collection.

Each mold is handmade in our own workshop in the Netherlands using premium silicone and is designed for repeated casting.

Silicone mold for a medium size Flower Tray, shaped as a Poppy. The tray is 20 cm (8") wide, 15 cm (6") high and 8 mm (1/3") thick. The petals are delicately engraved.

Nature meets function! This medium-sized Poppy Tray mold is perfect for creating a graceful centerpiece, a jewelry tray, or even a decorative catch-all dish. Its flowing petal shape makes every piece feel like a fresh spring day. Combine translucent resin with gold leaf or dried flowers for a truly stunning effect. Creativity is calling, will you answer?

The mold is part of our Poppy collection, which also includes molds for coasters, for 9 ornaments and for a larger tray.

Silicone mold for a large Cascade Hexagon tray. The tray is from side to side 25 cm (10") wide and 9 mm (1/3") thick. 

The tray is made up of three layers of 3 mm each. Each layer is slightly smaller than the previous layer, which gives the sides of the tray a unique cascade-like appearance.

There is also a Hexagon coaster mold available with the same cascade design, see one of the pictures (for illustrative purposes, this items is only for the tray mold). Both molds are also available as a set, at a special price.

Silicone mold for a thick square block. The block is 20 x 20 cm (8" x 8") wide, 2 cm (4/5") thick and the mold has a smooth and shiny finish.

This square mold is suitable for deep pour projects, like flower preservation. We also have a deep pour square mold available in 15 x 15 cm (6" x 6") and in 25 x 25 cm (10" x 10").

Two silicone molds for:

• 4 Oval coasters, engraved with thin graceful lines. The coasters are 9.5 x 12.5 cm (3 3/4" x 5") wide and 8 mm (1/3") thick.
• a holder for these oval coasters. The holder is 12.5 x 16.5 cm (5" x 6 1/2") wide, the baseplate is 8 mm (1/3") thick and it is engraved with thin graceful lines. You can fix the supports of the holder with a drop of glue or resin so that it becomes a solid piece (Tip: place the holder upside down, so that the supports will hang vertically while the glue or resin is drying).

Note: do not apply too thick a dome layer on the supports, because then they will no longer fit through the slots.

There are also molds available for two oval trays with the same graceful line pattern.

These two molds are together with the large oval tray 'Graceful lines' also as a set of 3 molds available, for a special setprice.

Note: do not apply too thick a dome layer on the legs, because then they will no longer fit through the slots.

We also have a 28 cm (11") large tray mold available, with the same decorative engraving. 

Silicone mold for a Holographic holder for 4 round Geode coasters, that are maximum 12.5 cm (5") wide and 8 mm (1/3") thick. The holder is the same as the holder for our normal round Geode coasters, but then with a holographic color effect, which  will transfer to the surface of your resin coaster holder.

This holder is specifically designed for our Holographic Geode Coasters, see one of the pictures (for illustratives purposes, this item is only for the holder mold). Both the holographic holder and matching coaster mold are as a set available, for a special setprice.

You insert the legs from the bottomside through the slots of the base plate and you can fix them with a drop of glue or (UV) resin so that it becomes a solid piece (Tip: place the holder upside down, so that the legs will hang vertically while the glue or resin is drying).

Note: do not apply too thick a dome layer on the legs, because then they will no longer fit through the slots.

Silicone mold for a Holographic holder for 4 (holographic) Hexagon coasters which are from side to side 10 cm (4") wide and 8 mm (1/3") thick. The holder has a holographic color effect, which will transfer to the surface of your resin coaster holder.

The holder mold is also available in a normal version, without the holographic effect.

This holder is a perfect match for the Holographic Hexagon coasters, see one of the pictures (for illustrative purposes, this item is only for the holder mold).

Both holographic molds are also as a set of 2 molds available, for a special setprice.

The six legs of the holder have to be attached from the bottomside through the slots of the base plate. You can fix the legs with a drop of glue or (UV) resin so that it becomes a solid piece (Tip: place the holder upside down, so that the legs will hang vertically while the glue or resin is drying).

Note: do not apply too thick a dome layer on the legs, because then they will no longer fit through the slots.

Four silicone inlay molds for Round coasters. The molds are 9 cm (3 1/2") wide and they are a perfect match for our mold for 10 cm (4") round coasters. And because the inlay molds are appr. 4 mm (1/6") thick, your result will be a coaster with a raised edge and a beautiful engraved surface.

We also have a few other round inlay molds available with a different pattern, see one of the pictures.

Silicone mold for 3 Door Hangers, openings to the left. The Door Hangers are 8 cm (3 1/8") wide, 21 cm (8 1/4") tall and 8 mm (1/3") thick.

Create three decorative door hangers with hooks that open to the left. Each hanger offers plenty of space for colours, glitter, layered effects and your own creative details. Use them for seasonal decorations, personalised signs or handmade gifts. A practical and playful addition to any resin artist’s collection.

We also offer a mold for door hangers with hooks opening to the right. Both molds are also available together as a set, at a special set price.

Set of 2 silicone molds for:

• four Lavatera Flower Coasters. The coasters are 12.5 cm (5") wide, 11.5 cm (4 1/2") high and 8 mm (1/3") thick.
• a large Lavatera Flower Tray. The tray is 27.5 cm (10 4/5") wide, 25 cm (10") high and 8 mm (1/3") thick.

The petals of the Lavatera are delicately engraved.

This versatile mold set combines the Large Lavatera tray with four matching Lavatera coasters. The graceful flower shape and subtle engraved details create a beautifully coordinated collection for your table or home décor. Experiment with matching colours and effects, or give each piece its own unique look. Perfect for creating an elegant serving set, a thoughtful handmade gift or a complete floral statement in resin.

These molds are part of our Lavatera Flower Collection, which includes three different tray sizes, a mold for four Lavatera coasters and several carefully selected mold sets.

Create an elegant floral coaster set with this handmade silicone mold for four Lavatera Flower Coasters. Each coaster features the same graceful flower shape and delicate engraved petal details as the matching Lavatera trays, giving the finished pieces a refined botanical look.

The smooth casting surface and subtle floral engraving make these flower coaster silicone molds for resin ideal for experimenting with coordinated colours, shimmering pigments, metallic accents, dried flowers or individual decorative effects. You can create a matching set or give every coaster its own unique character.

These Lavatera coasters are beautiful on their own and pair perfectly with the matching Lavatera trays, available in three different sizes. Together, they create a coordinated floral collection for table décor, handmade gifts and decorative resin pieces.

Each mold is handmade in our own workshop in the Netherlands using premium silicone and is designed for repeated casting.

Set of three silicone molds for a small, a medium size and a large Lavatera Flower tray. The small tray is 17.5 cm (6 9/10") wide and 16 cm (6 3/10") high, the medium size tray is 22.5 cm (8 9/10") wide and 20.5 cm (8") high, the large tray is 27.5 cm (10 4/5") wide and 25 cm (10") high. Both trays are 8 mm (1/3") thick.

The complete Lavatera collection brings together all three tray sizes in one versatile mold set. Each tray features the same graceful flower shape and subtle engraving, creating a beautifully coordinated result. Use them individually, arrange them as a decorative collection or combine all three to make a spectacular tiered cake stand. Three sizes means even more room to experiment with colours, effects and creative combinations.

These molds are part of our Lavatera Flower Collection, which includes these three trays, a mold for four Lavatera coasters and several carefully selected mold sets.