All molds

Silicone mold for a set of four Holographic square coasters of 10 x 10 cm (4" x 4") and 8 mm (1/3") thick.

These coasters are the same as our normal square coasters, but then with a Holographic color effect, which  will transfer to the surface of your resin coasters. We call this specific effect 'Color Burst'!

The holographic coasters will fit in the holder for the normal square coasters, which is separately available.

Set of two silicone molds for four Slate coasters and a matching holder. The slates are approx. 11 x 13 cm (4 1/3" x 5 1/10") and they are 6 mm (1/4") thick. The edges of the coasters and holder are coarsened, for that specific slate look and feel.

There is also a matching oval slate tray available, see one of the pictures (for illustrative purposes, the tray mold is not included in this item).

The molds are also available separately.

Silicone mold for ..... a tray? Or a suncatcher? Or a decorative panel? Actually, this is a multipurpose Holographic silicone mold with a beautiful Tiffany-style Flower decoration. You can make a tray with it, or a suncatcher if you use transparent resin, or a decorative panel in front of a window or on a wall. Whatever you make, the endresult will look different at any time, from any angle, and with any (changing) lightsource.

The mold is 24.5 cm x 24.5 cm (9 3/5" x 9 3/5") wide and 6.5 mm (1/4") thick. The Tiffany-style flower pattern will be raised on the surface of the tray.

Silicone mold for a medium size Druzy (crystal) Geode Trinket dish. The external diameter of the dish is 18.5 cm (7 1/4") and the internal diameter is 14.5 cm (5 2/3"). The total height of the trinket dish is 18 mm ( 2/3"), with a raised inner edge of 13 mm (1/2"). The shiny bottom of the dish is 5 mm (1/5") thick.

Resin quantity: approx. 225 gr. (8 oz)

Add a little magic to your craft projects with this mold for a stunning trinket dish, made of beautiful druzy crystals. Its glossy, sparkling finish is just the beginning, thanks to the 13 mm (1/2") high inner edge there’s plenty of room for your creative ideas! Use inlay molds, shapes or anything else that inspires you to make a one-of-a-kind piece. Perfect for any crafter looking to add a touch of elegance and creativity!

Looking for more dazzling Druzy Crystal molds? Explore our full collection of unique shapes and sizes, perfect for any creative project!

Silicone mold for a medium size Trinket Dish. The Trinket Dish is 12.5 x 25 cm (5" x 10") wide and it has two layers. The baselayer is 8 mm (1/3") thick and the raised edge is 6 mm (1/4") high. The dish is in total 14 mm (just over 1/2") thick.

The raised edge is along the entire side 5 mm (1/5") narrower than the baselayer, giving the dish an elegant appearance!

There are two larger Trinket Dishes available, see one of the pictures (for illlustrative purposes, this item is only for the medium size Trinket Dish). The three molds are also available in sets of two or three, for special setprices.

Silicone mold for 9 Christmas ornaments, in 3 different shapes: Balls, Stars and Bells. Each ornament is about 7.5 cm (3") wide and 8.5 cm (3 1/3") high. They are 6 mm (1/4") thick.

The same ornaments are also available with a holographic color effect, that will transfer to the surface of your resin Christmas ornaments.

Silicone mat with a crystal structure. The size of the mat is 40 x 52 cm (15 3/4" x 20 1/2") and it is very thin and flexible. The mat can be used to cut your own inlay molds, in any shape that you like. You can then use them in other silicone molds, even against a vertical surface.

And because it's so thin, it's very easy to cut with for instance a hobby knife, scissors or even with an electronic cutting machine like a Cricut or Cameo.

Silicone mold for 30 tags with a keychain hole. There are 3 different shapes in the mold, a round disc, a heart and a traditional shaped tag. Each tag is 55 mm (2") wide, 6 mm (1/4") thick and the holes have a diameter of 5 mm (1/5"). 

You can now personalize the beautiful gifts that you make for your friends and customers even further with the tags that you create with this mold.

Siliocone mold for a round disc of 15 cm (6") and 1 cm (2/5") thick. For example, the mold can be used together with our smaller inlay molds, like the inlay mandalas, see one of the pictures (for illustrative purposes, this item is only for the round disc mold).

There are also molds for a 25 cm (10") and a 35.5 cm (14") disc available.

Silicone mold for a set of 4 Holographic Hexagon coasters. The coasters are from side to side 10 cm (4") wide and 8 mm (1/3") thick. The holder has a holographic color effect, which will transfer to the surface of your resin coasters.

The coaster mold is also available in a normal version, without the holographic effect.

There is also a Holographic holder mold available, see one of the pictures (for illustrative purposes, this item is only for the coasters mold). Both holographic molds are also as a set of 2 molds available, for a special setprice.

Silicone mold for an extra large 'Fantasy' tray. The tray is 35.5 cm (14") wide and 8 mm (1/3") thick.

This mold is one of our molds with the Fantasy theme, which further consists of a coaster mold, a coaster holder, 3 smaller trays, 2 cakestands and a set of 8 medallions.

We made several of these molds in sets available, for special setprices.

Silicone mold for a round Geode tray. The tray is 35 cm (14") wide and 10 mm (2/5") thick.

We have this tray design in 3 more sizes available, 15 cm (6"), 20 cm (8") and 25 cm (10").

A matching set of 4 coasters, the 'Round Geode Coasters (2021), is available as well.

Silicone mold for a round Geode tray. The tray is 20 cm (8") wide and 10 mm (2/5") thick.

We have this tray design in 3 more sizes available, 15 cm (6"), 25 cm (10") and 35 cm (14").

A matching set of 4 coasters, the 'Round Geode Coasters (2021), is available as well.

Look, who is peeping through the window? That's Rudolph, the red nose Reindeer! He probably wants to join in the fun Christmas festivities.

Deep pour silicone mold with Rudolph, the Red nose Reindeer. The size of the block mold is 15 x 15 cm (6" x 6") and it's 2 cm (4/5") thick. Rudolph is watching on top of the block, he is 3 mm (1/9") thick.

The mold is thick enough to add for instance a string of Christmas lights in the resin, which will give a beuatiful look to Rudolph!

Silicone mold for 9 Holographic Christmas ornaments, in 3 different shapes: Balls, Stars and Bells. Each ornament is about 7.5 cm (3") wide and 8.5 cm (3 1/3") high. The ornaments are 6 mm (1/4") thick and they have a holographic color effect, that will transfer to the surface of your resin Christmas ornaments.

We also have a mold available for the same ornaments, but then without the holographic color effect.

Silicone mold for a large Druzy (crystal) Elongated Trinket Dish. The external dimensions are 29 x 15 cm (11 2/5" x 6") and the internal dimensions are 24.5 x 10.5 cm (9 2/3" x 4 1/7"). The total height of the trinket dish is 19 mm ( 3/4"), with a raised inner edge of 10 mm (2/5"). The shiny bottom of the dish is 9 mm (1/3") thick.

Resin quantity: approx. 470 gr. (17 oz)

Sleek, stylish, and uniquely elegant! This mold brings a fresh, modern shape to resin artistry. With its beautifully rounded edges and long, refined form, this mold is perfect for crafting elegant jewelry trays, statement decor pieces, or functional art with a dazzling crystal finish. The generous depth allows for stunning resin effects, from layered designs to shimmering inclusions. A must-have for artists looking to create something truly exceptional!

Looking for more dazzling Druzy Crystal molds? Explore our full collection of unique shapes and sizes, perfect for any creative project!

Silicone mold for a set of four 'Magical' coasters. The coasters are 11.5 cm (4 1/2") wide and 8 mm (1/3") thick.

This mold is one of our molds with the Magical theme, which further consists of a coaster holder mold, 4 trays and a set of 8 medallions, see one of the pictures (for illustrative purposes, this item is only for the coasters mold).

Some of these molds are also in a set of 2 or 3 molds available, for special setprices.

This mold is also available in a Holographic version.

Silicone mold for a set of four coasters, engraved with the Mandala Jerusalema. The coasters are 112 mm (4 2/5") wide and 8 mm (1/3") thick.

This mold is part of the theme 'Jerusalema', which also includes the holder for these coasters, two trays and a set of 8 medallions, see some of the pictures (for illustrative purposes, this item is only for the coasters mold).

Silicone mold for a large 'Fantasy' tray. The tray is 25 cm (10") wide and 8 mm (1/3") thick.

This mold is one of our molds with the Fantasy theme, which further consists of a coaster mold, a coaster holder, 2 smaller trays, 1 larger tray, 2 cakestands and a set of 8 medallions.

We made several of these molds in sets available, for special setprices.

Three silicone molds for:

• a set of four square Kintsugi coasters (Kintsugi is the Japanese art of fixing broken pottery). The coasters are 10 x 10 cm (4" x 4") and 8 mm (1/3") thick.
• a holder for the Kintsugi coasters. The holder is large enough for four coasters of 10 x 10 cm (4" x  4") and 8 mm (1/4") thick. You can fix the legs with a drop of glue or resin so that it becomes a solid piece (Tip: place the holder upside down, so that the supports will hang vertically while the glue or resin is drying).
• a square Kintsugi tray. The tray is 25 x 25 cm (10" x 10") and 8 mm (1/3") thick.

Note: do not apply too thick a dome layer on the legs of the holder, because then they will no longer fit through the slots.

The molds are also available separately.

Silicone mold for four Slate coasters. The size of the coasters is approx. 11 x 13 cm (4 1/3" x 5 1/10") and they are 6 mm (1/4") thick. The edges of the coasters are coarsened, for that specific slate look and feel.

The coasters have a smooth surface, the 'crushed ice' effect that is visible in one of the pictures, is made with a set of inlay molds (separately available).

We also have a holder mold available that is specifically designed to hold 4 slate coasters, as shown in one of the pictures. Both molds are also available as a set, for a special setprice.