Sort by:
620 products
620 products
Silicone mold for a Square Tealight Candle Holder. The candle holder is 7.5 x 7.5 cm (3" x 3") and 4.6 cm (1 4/5") high. The cupsize is 58 mm (2 1/4")!
Because of the height and shape of the mold, it's very suitable for pouring flowers, for example.
You can also use acrylic resins with this mold, like Jesmonite, Hydroflow and Artestone.
We also have 'deep-pour' molds available for other tealight candle holders, as seen in some of the pictures (for illustrative purposes, this item is only for the Square tealight candle holder mold).
Silicone mold for a large oval tray, engraved with wild flowers. The oval tray has the shape of an egg, it's 28 cm (11") tall, 20 cm (8") wide and 8 mm (1/3") thick.
Other engraved oval tray molds in our botanical collection are the daisies tray and the narcissus tray, see one of the pictures (for illustrative purposes, this item is only for the wild flowers mold).
Silicone mold for a set of eight decorative (napkin ring) medallions, shaped as a Daisy flower. Each medallion is 55 mm (2 1/6") wide and 8 mm (about 1/3") thick.
This medallion mold can be used together with our mold for the (napkin) rings, which is especially designed to form the base for these medallions. Together they make a unique napkin ring.
(The mold for the rings is separately available).
Four silicone inlay molds for Square coasters. The molds are 9 cm (3 1/2") wide and they are a perfect match for our mold for 10 cm (4") square coasters. And because the inlay molds are appr. 4 mm (1/6") thick, your result will be a coaster with a raised edge and a beautiful engraved surface.
We also have a few other square inlay molds available with a different pattern, see one of the pictures.
Four silicone inlay molds for Hexagon coasters. The molds measure 9 cm (3 1/2") from side to opposite side and they are a perfect match for our mold for 10 cm (4") Hexagon coasters. And because the inlay molds are appr. 4 mm (1/6") thick, your result will be a Hexagon coaster with a raised edge and a beautiful engraved surface.
We also have a few other Hexagon inlay molds available with a different pattern, see one of the pictures.
Set of 2 molds - Jerusalema (Mandala) coasters with matching holder
Set of 2 molds - Jerusalema (Mandala) coasters with matching holder
- a set of four coasters, engraved with the Mandala Jerusalema. The coasters are 112 mm (4 2/5") wide and 8 mm (1/3") thick.
- a matching holder. The legs of the holder are 42 mm (1 2/3") tall and you insert them from the bottomside through the slots of the base plate. You can fix the legs with a drop of glue or (UV) resin so that it becomes a solid piece (Tip: place the holder upside down, so that the legs will hang vertically while the glue or resin is drying).
The holder mold is part of our 'Mandala Jerusalema' design line, in which besides these two mold are also a small and medium sized tray and a set of 8 medallions.
Three silicone molds for Christmas Baubles with a decorative ribbon:
- Two baubles of 10 cm (4") wide and 13.5 cm (5 1/3") high.
- One bauble of 15 cm (6") wide and 20.5 cm (8") high.
- One bauble of 20 cm (8") wide and 27.5 (10 4/5") high.
Each bauble is 8 mm (1/3") thick and the molds are also available separately.
Silicone mold for an Art panel, titled Impact. The panel is 20 x 20 cm (8"x 8") wide and can maximum be 18 mm (7/10") thick.
Create striking wall art with our Impact panel mold. Designed with bold, concentric shapes that "collide" for a dynamic, repeating pattern, this mold allows you to craft stunning, custom wall decor. Perfect for working with Jesmonite, Jesin or similar materials, the matte finish ensures a beautifully smooth, modern look. Combine multiple panels for endless design possibilities and turn your wall into a unique eyecatcher.
!! ATTENTION: this mold doesn't have a glossy finish. Use it therefore with Jesmonite, Jesin, A1 and similar products that consist of water-based acrylic hardeners in combination with mineral powders. Pouring with resin will not result in a shiny (glossy) panel, it will have a matte finish.
We also have other molds available for (wall) Art panels, these panels all have the same width of 20 x 20 cm and thickness may vary.
Silicone mold for an XL Cup tray. The tray is 35.5 cm (14") wide, 25.5 cm (10") high and 8 mm (1/3") thick.
There are also molds available for a smaller Cup tray, which is 25 cm (10") wide, and for a set of 4 Cup coasters, see one of the pictures (for illustrative purposes, this item is only for the XL Cup tray mold).
Silicone mold for a Tube tray. The tray is 12.5 x 25 cm (5" x 10") wide and 1 cm (2/5") thick. The tray has a flat bottom and the top consists of 5 adjacent tubes.
!! ATTENTION: this mold doesn't have a glossy finish. Use it therefore with Jesmonite, Jesin, A1 and similar products that consist of water-based acrylic hardeners in combination with mineral powders. Pouring with resin will not result in a shiny (glossy) tray, it will have a matte finish, as shown in the pictures.
We also have a mold available for 2 matching Tube coasters, see one of the pictures (for illustrative purposes, this item is only for the Tube tray mold). Both molds are also available as a set, for a special setprice.
Silicone mold for a large Cascade Daisy tray. The tray is 26 cm (10 1/4") wide and 9 mm (1/3") thick.
The tray is made up of three layers of 3 mm each. Each layer is slightly smaller than the previous layer, which gives the sides of the tray a unique cascade-like appearance.
There is also a Daisy coaster mold available with the same cascade design, see one of the pictures (for illustrative purposes, this items is only for the tray mold). Both molds are also available as a set, at a special price.
Set of three silicone molds for our trays with the Oriental theme. The trays are 15 cm (6"), 20 cm (8") and 25 cm (10") wide and 8 mm (1/3") thick.
These three molds are part of our molds with the Oriental theme, which further consists of a coaster mold, a coaster holder mold, an XL tray and a set of 8 medallions.
Some of these molds are also in a set of 2 or 3 molds available, for special setprices.
Set of two silicone molds for our trays with the Oriental theme. The trays are 15 cm (6") and 20 cm (8") wide and 8 mm (1/3") thick.
These two molds are part of our molds with the Oriental theme, which further consists of a coaster mold, a coaster holder, 2 larger trays and a set of 8 medallions.
Some of these molds are also in a set of 2 or 3 molds available, for special setprices.
Silicone mold for a deep round disc. The disc is 22 cm (8 2/3") wide, 2 cm (4/5") thick and the mold has a smooth and shiny finish.
The disc mold is suitable for deep pour projects, like flower preservation. We also have a deep pour round mold available in 12 cm (4 3/4"), 17 cm (6 2/3") and in 27 cm (10 2/3").
Silicone mold for a Christmas ornament with a Druzy Crystal Christmas bell. The ornament is 15 cm (6") tall, 11 cm (4 1/3") wide and 6 mm (1/4") thick.
We have 2 more Druzy Crystal ornament molds of the same size available, one with a Christmas tree and one with a Christmas star, see one of the pictures (for illustrative purposes, this item is only for the Crystal Christmas bell mold). The three ornament molds are also as a set of 3 molds available, for a special setprice.
Silicone mold for a large Heart shaped tray. The tray is 30 cm (12") wide, 27.8 cm (11") high and 8 mm (1/3") thick.
There are also molds available for a set of 4 heart shaped coasters and for a small heart shaped tray / coaster holder, see one of the pictures (for illustrative purposes, this item is only for the large tray mold).
We also combined the 3 molds in 2 different available sets, for special setprices.
This same large tray mold is also available in a Holographic version.
Silicone mold for two Holographic Intertwined Hearts. The hearts are 8 mm (1/3) thick and together they are 26.5 cm (10 2/5") wide and 19.5 cm (7 2/3") tall.
The mold has a holographic color effect, which will transfer to the surface of your resin hearts.
The mold is also available in a regular verison, without the holographic color effect.
Silicone mold for a set of eight (napkin ring) medallions, with a decorative 'Merry Christmas' engraving. Each medallion is 5.5 cm (2 1/6") wide and 8 mm (about 1/3") thick.
This medallion mold can be used together with our mold for the (napkin) rings, which is especially designed to form the base for these medallions. Together they make a unique napkin ring.
We have several other molds available with the same 'Merry Christmas' engraving, see one of the pictures (for illustrative purposes, this item is only for the medallion mold) and these molds are also in a set of 2 or 3 molds available, for special setprices.
Silicone mold for 6 Christmas Bell ornaments, with holes for a ribbon or cord. Each bell is 10 cm (4") wide and high and they are 6 mm (1/4") thick.
The same bells are also available in a mold with a holographic color effect, that will transfer to the surface of your resin Christmas ornaments.
Set of 3 molds - Holographic round Geode tray with coasters and holder
Set of 3 molds - Holographic round Geode tray with coasters and holder
- a large round geode tray. The tray is 28 cm (11") wide and 8 mm (1/3") thick.
- a set of four round Geode coasters. The coasters are 12.5 cm (5") wide and 8 mm (1/3") thick.
- a matching holder. This holder is suitable for the 4 Geode coasters. You insert the legs from the bottomside through the slots of the base plate. You can fix the legs with a drop of glue or (UV) resin so that it becomes a solid piece (Tip: place the holder upside down, so that the legs will hang vertically while the glue or resin is drying).
These silicone molds have holographic color effects, which will transfer to the surface of your resin artwork. The molds are also in a normal version available, without holographic effect.
Set of 2 Tetris molds - Square coasters with raised edge + holder
Set of 2 Tetris molds - Square coasters with raised edge + holder
Two silicone molds for:
- a set of four square coasters with a raised edge and a 'Tetris' pattern. The coasters are 10 x 10 cm (4" x 4") and 8 mm (1/3") thick.
-
a matching holder, which holds 4 coasters of maximum 8 mm (1/3") thick. You can fix the supports with a drop of glue or resin so that it becomes a solid piece (Tip: place the holder upside down, so that the supports will hang vertically while the glue or resin is drying).
Note: do not apply too thick a dome layer on the legs, because then they will no longer fit through the slots.
The coaster mold and the holder mold are also separately available.
Silicone mold for a set of four square coasters with a raised edge and a 'Tetris' pattern. The coasters are 10 x 10 cm (4" x 4") and 8 mm (1/3") thick.
The same sized coasters are also available without a raised edge, these are 6 mm (1/4") thick.
A matching Tetris coaster holder is separately available, which holds 4 coasters, and both the coaster mold and the holder mold are also as a set available, for a special setprice.
To make the Tetris range complete, there is a square 28 x 28 cm (11" x 11") Tetris tray with raised edge in our collection, see some of the pictures (for illustration purposes, this item is only for the coaster mold).
Showing 432/620