Produkte

Silicone mold fora Geode winebutler, for two glasses. The winebutler is 8 mm (1/3") thick.

The winebutler mold is also in a holographic version available, for spectacular color effects on the surface of your winebutler!

Would you like to surprise someone with a mold, but you don't know which one? Then a (digital) Gift Card might be a great idea!

The Gift Card is valid for any mold that is available in the shop at the time of redemption. There are Gift Cards with a value of 15 Euro, 20 Euro and 25 Euro and you will receive an e-mail with the redemption code after you completed the order.

The gift cards never expire.

Silicone mold for 2 large engraved Gingerbread men. The Gingerbread men 20 cm (8") tall and 6 mm (1/4") thick.

We have 2 more molds available, with Gingerbread men of 7.5 cm (3") and 10 cm (4") tall.

Silicone mold for 6 small engraved Gingerbread men. The Gingerbread men are 10 cm (4") tall and 6 mm (1/4") thick.

We have 2 more molds available, with Gingerbread men of 7.5 cm (3") and 20 cm (8") tall.

The video of Claire's Crafty Corner shows how to do the icing lines in the most realistic way.

Silicone mold for 9 extra small engraved Gingerbread men. The Gingerbread men are 7.5 cm (3") tall and 6 mm (1/4") thick.

We have 2 more molds available, with Gingerbread men of 10 cm (4") and 20 cm (8") tall.

Silicone mold for 10 engraved Gingerbread ornaments. The ornaments are between 7.5 (3") and 8 cm (3 1/6") tall and they are 6 mm (1/4") thick.

There are nine different ornaments, the Gnome ornament is double and the candy stick is mirrored.

Four silicone inlay molds featuring an engraved Cute Gnome. The molds are 9.2 cm (3 2/3") wide and appr. 3 mm (1/9") thick.

These inlay molds are a perfect match for our round coaster mold, or even for our mold for a Coffee and Cookies serving tray, as shown in one of the pictures (artist: Petra van Vlaanderen), resulting in a creation with a raised edge and a beautiful design.

We also have other round inlay molds available with different patterns.

BOO!

Silicone mold for 8 Halloween Ghost keychains. The ghosts are 6 mm (1/4") thick and 6 cm (2 1/3") tall. The width varies by ghost and each ghost has its own engraved facial expression.

The mold is also in a holographic version available (the holographic color effect will  transfer to the surface of your resin ghost keychains)!

Silicone mold for 7 Halloween Pumpkin keychains. The pumpkins are 6 mm (1/4") thick, 5.7 cm (2 1/4") wide and 6 cm (2 1/3") tall. Each pumpkin has its own engraved facial expression. 

There are 2 other versions of the pumpkins available, a 'holographic Halloween' version with engraved faces (the holographic color effect will transfer to the surface of your resin pumpkin keychains) and a 'plain' version, without engraved faces and without a holographic color effect. 

One of the pictures shows all 3 molds (for illustrative purposes, this item is only for the 'Halloween' pumpkin mold).

Silicone mold for a large decorative Pumpkin tray, featuring a Spooky House with some menacing bats! The tray is 28 cm (11") wide, 27 cm (10 2/3") high and 8 mm (1/3") thick. The Spooky House design is 0.75 mm thick and it will be raised on the surface of the tray.

Start your Halloween decorations off on the right foot with this spooky-cool Pumpkin tray! Featuring a large Halloween pumpkin, with a spooky house and even a few bats, it will be a frightful sight and it's the perfect way to get you in the spooky spirit. Boo-tiful!

We also have another mold available for a large Halloween pumpkin tray, featuring a Tombstone Zombie.

Silicone mold for a large decorative Pumpkin tray, featuring a Tombstone Zombie! The tray is 28 cm (11") wide, 27 cm (10 2/3") high and 8 mm (1/3") thick. The Tombstone design is 0.75 mm thick and it will be raised on the surface of the tray.

Add some spooky fun to your Halloween decoration with your homemade Pumpkin tray featuring a Tombstone Zombie design. It will be a frightful sight and it's the perfect way to get you in the spooky spirit. Boo-tiful!

We also have another mold available for a large Halloween pumpkin tray, featuring a Spooky House.

Silicone mold for a decorative Halloween shield, featuring an Evil Pumpkin! The shield is 17 cm (6 2/3") wide, 25 cm (10") high and 8 mm (1/3") thick. The decorative design is 0.75 mm thick and it will be raised on the surface of the shield.

This Halloween shield is perfect for those looking to send a chill down their guests' spines! With an evil pumpkin and menacing bats, it's sure to be the spookiest decoration on the block! Hauntingly good fun!

We also have 3 other molds available for a Halloween shield, all with their own decorative design, see one of the the pictures for one of them (for illustrative purposes, this item is only for the 'Evil Pumpkin' shield).

Silicone mold for a decorative Halloween shield with a Mystical Witch! The shield is 17 cm (6 2/3") wide, 25 cm (10") high and 8 mm (1/3") thick. The decorative design is 0.75 mm thick and it will be raised on the surface of the shield.

Use this mold to create and decorate your interior or frontdoor with a Halloween shield, featuring a Mystical Witch, a scary cat and some huge bats! Perfect for adding a bit of spooky fun to your Halloween decor. Get ready to scare (in a cute way) with a unique homemade decoration shield.

We also have 3 other molds available for a Halloween shield, all with their own decorative design.

Silicone mold for a decorative Halloween shield, featuring a Black Scary Cat! The shield is 17 cm (6 2/3") wide, 25 cm (10") high and 8 mm (1/3") thick. The decorative design is 0.75 mm thick and it will be raised on the surface of the shield.

Greet trick-or-treaters with this spooktastic Halloween shield! Featuring a scary 'black' cat, bats and a spiderweb, this Halloween decoration is sure to have visitors “cat-tured” in its bewitchment!

We also have 3 other molds available for a Halloween shield, all with their own decorative design, see one of the the pictures for one of them (for illustrative purposes, this item is only for the 'Scary Cat' shield).

Silicone mold for a decorative Halloween shield with a Tombstone Zombie! The shield is 17 cm (6 2/3") wide, 25 cm (10") high and 8 mm (1/3") thick. The decorative design is 0.75 mm thick and it will be raised on the surface of the shield.

Get ready to spookify your house with a scary Halloween shield, created by yourself! This unique shield will turn your frontdoor or porch into a spooky entrance with its tombstone and zombie design. Trick-or-treaters beware!

We also have 3 other molds available for a Halloween shield, all with their own decorative design.

Silicone mold for 4 Halloween coasters, featuring a Spiderweb! And the spider is still in the web, hunting for a treat!

The coasters are 12.5 cm (5") wide and 8 mm (1/3") thick. The Webdesign is 0.75 mm thick and it will be raised on the surface of the coasters.

There is also a mold available for a large Spiderweb tray, with an even larger Spider, and both molds are also as a set available, see one of the pictures (for illustrative purposes, this item is only for the spiderweb coaster mold).

Silicone mold for a large Halloween tray, featuring a Spiderweb, with a huge Spider crawling around!

The tray is 30 cm (12") wide and 8 mm (1/3") thick. The Big Web is 0.75 mm thick and it will be raised on the surface of the tray.

There is also a mold available for 4 Spiderweb coasters and both molds are also as a set available, see one of the pictures (for illustrative purposes, this item is only for the spiderweb tray mold).

Silicone mold for a set of 4 Heart shaped coasters. The coasters are 14.5 cm (5 7/10") wide, 13.5 cm (5 1/3") tall and 8 mm (1/3") thick.

There are also molds available for a small heart shaped tray / coaster holder (designed for these coasters) and for a large heart shaped tray, see one of the pictures (for illustrative purposes, this item is only for the coasters mold). We also combined the 3 molds in 2 different available sets, for special setprices.

Silicone mold for a large Heart shaped tray. The tray is 30 cm (12") wide, 27.8 cm (11")  high and 8 mm (1/3") thick.

There are also molds available for a set of 4 heart shaped coasters and for a  small heart shaped tray / coaster holder, see one of the pictures (for illustrative purposes, this item is only for the large tray mold). 

We also combined the 3 molds in 2 different available sets, for special setprices.

This same large tray mold is also available in a Holographic version.

Silicone mold for a set of 4 Hexagon coasters. The coasters are from side to side 10 cm (4") wide and 8 mm (1/3") thick.

This coaster mold is part of our line of Hexagon molds, in which besides this mold are also molds for a matching coaster holder, two hexagon trays, a set of eight hexagon medallions and a set of eight hexagon napkin rings.

There are two special prized hexagon sets of 3 molds available with this coaster mold, one set with the holder and the medium sized hexagon tray and one set with the holder and the large hexagon tray.

It is also easy to make Hexagon coasters with a raised edge and an engraved pattern if you combine this mold with one of our Hexagon inlay molds.

The Hexagon coaster mold is also in a holographic version available, for spectacular color effects on the surface of your resin coasters!

This mold is especially designed to use together with our mold for eight Hexagon medallions, see one of the pictures (for illustrative purposes, this item is only for the ring mold).

There are also hexagon shaped molds available for two trays, a set of four coasters and a matching coaster holder.