Produkte

Silicone mold for a Trinket Dish in the shape of a Clover leaf. The Clover leaf is 25.5 x 25.5 cm (10" x 10") wide and it has two layers. The baselayer is 8 mm (1/3") thick and the raised edge around the compartments is 6 mm (1/4") high. The dish is in total 14 mm (just over 1/2") thick and each compartment of the Clover is appr. 11 x 11 cm (appr. 4 1/3" x 4 1/3 ") wide.

The raised edge is along the entire side 5 mm (1/5") narrower than the baselayer, giving the Clover leaf dish an elegant appearance! And because of the 4 compartments you can use the dish also as a serving tray!

There is also a Trinket Dish mold available in the shape of an Oak leaf. Other available molds for trinket dishes have an ovalish shape.

Silicone mold for a Coffee and Cookies serving tray! The tray is 12.5 x 25 cm (5" x 10") wide and it has two layers. The baselayer is 8 mm (1/3") thick and the raised edge is 6 mm (1/4") high. The tray is in total 14 mm (just over 1/2") thick.

There are two compartments, one for a coffee cup/mug (or tea) and a larger one for the necessary cookies and/or chocolates!

The raised edge is along the entire side 5 mm (1/5") narrower than the baselayer, giving the tray an elegant appearance!

Silicone mold for an extra large rectangular Geode inlay mold. This is a special inlay mold because it has a center with a crystal structure, which is surrounded by a Crushed Ice structure. The inlay mold is 23 cm (9") x 31 cm (12 1/5") and about 4 mm thick. 

The inlay mold is pretty large and therefore a great combination with our mold for an extra large Rectangular Geode Tray.

Silicone mold for a set of four Geode coasters with the Crushed Ice effect. The coasters have a raised edge and are about 11 cm (4 1/3") wide and 8 mm (1/3") thick. 

There are also molds available for a large and extra large Geode tray that have the same Crushed Ice effect and raised edge, see one of the pictures for an example (for illustrative purposes, this item is only for the coaster mold).

Silicone mold for a large Geode tray with Crushed Ice effect. The tray is 25 cm wide (10") and has a raised edge.

There is also a mold for an identical larger tray, which is 35 cm wide (14"), and a set of Geode coasters with the same Crushed Ice effect and raised edges, see the pictures (for illustrative purposes, this item is only for the large tray mold).

Silicone mold for an extra large Geode tray with Crushed Ice effect. The tray is 35 cm wide (14") and has a raised edge.

There is also a mold for an identical smaller tray, which is 25 cm wide (10"), and a set of Geode coasters with the same Crushed Ice effect and raised edges, see the pictures (for illustrative purposes, this item is only for the XL tray mold).

Four silicone heart shaped inlay molds, with a crystal pattern. The hearts are about 8 cm (3 1/6") large and 3 mm (1/9") thick, so they will fit in every coaster mold.

Silicone mat with a crystal structure. The size of the mat is 40 x 52 cm (15 3/4" x 20 1/2") and it is very thin and flexible. The mat can be used to cut your own inlay molds, in any shape that you like. You can then use them in other silicone molds, even against a vertical surface.

And because it's so thin, it's very easy to cut with for instance a hobby knife, scissors or even with an electronic cutting machine like a Cricut or Cameo.

Silicone mold for a large Amethyst. The size of the Amethyst is about 11 cm (4 1/3") x 10 cm (4") and maximum about 3.5 cm (1 1/3") high.

Silicone mold for a large rectangular Crystal Geode inlay mold. The mold is 17 cm (6 2/3") x 23.5 cm (9 1/4") and 4 mm (1/6") thick. 

Silicone mold for a set of 4 Cup Coasters. The coasters are 12.5 cm (5") wide, 9 cm (3 1/2") high and 8 mm (1/3") thick.

There is also a mold for a Cup tray available, see one of the pictures (for illustrative purposes, this item is only for the cup coasters mold). Both molds are also available as a set, for a special setprice.

Silicone mold for a large Cup tray. The tray is 25 cm (10") wide, 18 cm (7") high and 8 mm (1/3") thick.

There is also a mold for a set of 4 Cup coasters available, see one of the pictures (for illustrative purposes, this item is only for the Cup tray mold). Both molds are also available as a set, for a special setprice.

Silicone mold for a set of four round Cute Christmas coasters. The coasters are 10 cm ( 4") wide, 8 mm (1/3") thick and they are engraved with a bunch of cute Christmas figures. 

There is also a mold available for a matching holder and both molds are also as a set available, see one of the pictures (for illustrative purposes, this item is only for the coaster mold).

The figures in the coasters present themself also in a large 30 cm (12") Christmas tray and in 12 cute Christmas ornaments, for which we have molds available separately.

Silicone mold for a large Cute Christmas tray. The tray is 30 cm (12") wide and 8 mm (1/3") thick.

The tray features the same Christmas figures as in the cute Christmas coasters, coaster holder and in the mold for 12 cute Christmas ornaments.

We also have a set of 3 molds available with this tray mold, the coaster mold and the coaster holder mold, see one of the pictures (for illustrative purposes, this item is only for the tray mold).

Silicone mold for 12 cute engraved Christmas ornaments. The ornaments are between 6 cm and 10.5 cm (2 1/3" and 4") high and they are 6 mm (1/4") thick. Each ornament has a hole for a ribbon or cord. 

Silicone mold for a set of 6 large Decorative Christmas Baubles. Each bauble is 10 cm (4") wide, 6 mm (1/4") thick and they all have a raised decorative pattern of 0.75 mm thickness.

We have 4 more Christmas Bauble molds of the same size available, with holographic color effects, with druzy crystal patterns, with engraved Gnomes (8 mm thick) and with a smooth surface.

Silicone mold for a Decorative Christmas ornament with a Christmas tree. The ornament is 15 cm (6") tall, 11 cm (4 1/3") wide and 6 mm (1/4") thick. The Christmas tree design is 0.75 mm thick and it will be raised on the surface of the ornament.

We have 2 more Decorative ornament molds of the same size available, one with a Snowflake and one with a Curls design, see one of the pictures (for illustrative purposes, this item is only for the Decorative Christmas tree mold). The three ornament molds are also as a set of 3 molds available, for a special setprice.

Silicone mold for a Decorative Christmas ornament with a beautiful Curls design. The ornament is 15 cm (6") tall, 11 cm (4 1/3") wide and 6 mm (1/4") thick. The Curls design is 0.75 mm thick and it will be raised on the surface of the ornament.

We have 2 more Decorative ornament molds of the same size available, one with a Christmas tree and one with a Snowflake, see one of the pictures (for illustrative purposes, this item is only for the Decorative Curls mold). The three ornament molds are also as a set of 3 molds available, for a special setprice.

Silicone mold for a Decorative Christmas ornament with a Snowflake. The ornament is 15 cm (6") tall, 11 cm (4 1/3") wide and 6 mm (1/4") thick. The Snowflake design is 0.75 mm thick and it will be raised on the surface of the ornament.

We have 2 more Decorative ornament molds of the same size available, one with a Christmas tree and one with a Curls design, see one of the pictures (for illustrative purposes, this item is only for the Decorative Snowflake mold). The three ornament molds are also as a set of 3 molds available, for a special setprice.

Silicone mold for 26 Holographic letter tags. The tags are flower shaped, they have a decorative engraving and each letter has an engraved border, which makes it pop out beautifully. The letter tags have keyring holes, they are 5 cm (2") wide and 6 mm (1/4") thick. The holographic color effect will transfer to the surface of your resin tags.

As a bonus we added the same engraved  holographic flower in the center of the mold, it is about 11 cm (4 1/3") large.

There is also a similar mold available with 26 medallions that are not holographic and don't have keyring holes.