Alle Formen

Deep pour silicone mold for a beautiful letter on top of a thick block. The size of the block is 15 x 15 cm (6" x 6") and it's 2 cm (4/5") thick. The letter is 11 cm (4 1/3") tall and 3 mm (1/9") thick. The width of the letter differs per letter.

This item is for one mold with one letter and you can select any letter of the Alphabet under the 'Available Options'.

The same block molds are also available in a smaller version of 10 x 10 cm (4" x 4").

Silicone mold for a large shiny Tree of Life symbol. This mold has two layers, a round base of 26.5 cm (10 2/5") wide and 8 mm (1/3") thick and the tree of life which is 25 cm (10") wide and 7 mm (3/10") thick. This makes the total symbol 26.5 cm (10 2/5") wide and 15 mm (3/5") thick.

The iconic Tree of Life symbolizes growth, balance and harmony. Use your artistic talents to create a beautiful and unique symbol, embrace your inner tree hugger and add a touch of whimsy to every room.

We also have (a smaller) Tree of Life mold available which has a matte finish, perfect to use with Jesmonite, Jesin, A1 and similar products that consist of water-based acrylic hardeners in combination with mineral powders.

Silicone mold for 4 round pendants with keychain holes. The pendants are 6 cm (2 1/3") wide and 1 cm (2/5") thick.

There is also a mold available with 9 pendants.

Silicone mold for a large Oval tray. The tray is 17 x 25 cm (6 2/3" x 9 5/6") wide, 1 cm (2/5") thick and it is engraved with thin graceful lines.

There are also molds available for matching coasters, a coaster holder and an XL tray, all engraved with the same graceful line pattern.

This mold is together with the matching coaster mold and coaster holder mold also as a set of 3 molds available, for a special setprice, see one of the pictures (for illustrative purposes, this item is only for the large oval tray mold).

This tray mold is also available in a plain version.

Silicone mold for a set of four coasters, engraved with the Dahlia Mandala. The coasters are 112 mm (4 2/5") wide and 8 mm (1/3") thick.

This mold is part of the theme 'Dahlia', which also includes the holder for these coasters, a tray and a set of 8 medallions, see some of the pictures (for illustrative purposes, this item is only for the coasters mold).

Silicone mold for 6 Holographic Christmas Star ornaments, with holes for a ribbon or cord. Each star is 10 cm (4") wide and high, 6 mm (1/4") thick and they have a holographic color effect, that will transfer to the surface of your resin Christmas ornaments.

We also have a mold available for the same ornaments, but then without the holographic color effect.

Silicone mold for a large Oval tray. The tray is 17 x 25 cm (6 2/3" x 9 5/6") and 1 cm (2/5") thick.

We also have an XL oval tray available, see one of the pictures (for illustrative purposes, this item is only for the large oval tray mold).

This oval tray is also available with a 'Graceful lines' engraving.

Silicone mold for two Geode coasters. The coasters are about 12.5 cm (5") wide and 8 mm (1/3") thick.

The shape of the two coasters is based on our original Geode coasters, designed back in 2020 and for which we still have a mold separately available as a set of four Geode coasters.

Silicone mold for 28 Holographic Domino stones. The stones are 24 mm x 50 mm (appr. 1" x 2") and 8 mm (1/3") thick.

The dots are hexagon shaped and the stones have a holographic finish that will transfer to the surface of your resin domino stones, giving you a beautiful display of colors!

We also have a non-holographic domino mold available, whose stones have a unique uneven surface.

Silicone mold for a large Tray with a Yin Yang Symbol engraved into it. Two sunflowers form the symbol and it is the same Yin Yang as we used in the mold for the set of four Yin Yang Sunflower coasters. The tray is 25 cm (10") wide and 8 mm (1/3") thick. 

The tray is also in an 14" XL version available.

Silicone mold for a medium size disc that is perforated with 48 holes, evenly spaced along the edge of the disc. The disc is 18 cm (7") wide and 8 mm (1/3") thick.

Open the gate to your creativity with the perforated disc that you can make with this mold! With 48 holes, it promises exciting horizons for all your fabric, ribbon, wicker and crochet projects. And who knows what other crafty ideas you'll come up with? Unleash your imagination and see what surprises you discover!

We also have a larger perforated disc mold available, as well as a few other perforated molds).

Silicone mold for 6 Christmas ornaments. The ornaments are 5 mm (1/5") thick and between 6.5 cm (2 3/5") and 11 cm (4 1/3") high.

This mold is for set #2, there is also a set #1 available and both molds are also available as a set of 2 molds, for a special setprice. One of the pictures shows both molds (for illustrative purposes, this item is only for set #2).

We have this mold also in a holographic version available.

Silicone mold for an oval Winebutler with a Holographic Broken Glass pattern. The holographic color effect will transfer into the resin, the end result depends on the colors and color combination that is used in the resin. The winebutler is 8 mm (1/3") thick.

The same design is also available in a smooth version, without pattern.

Silicone mold for a large Holographic Geode tray. The tray is 28 cm (11") wide and 8 mm (1/3") thick.

The mold has a holographic color effect, which  will transfer to the surface of your resin artwork.

We also have matching holographic Geode molds available for coasters, a coaster holder and medallions, as seen in one of the pictures (for illustrative purposes, this item is only for the holographic Geode tray mold). The 3 molds are also available in 2 different sets, for special setprices.

Update: We now have the same holographic tray also in a smaller 18 cm (7") version available.

Silicone mold for an extra large tray with a Yin Yang symbol engraved into it. Two sunflowers form the symbol and it is the same Yin Yang as we used in the mold for the set of four Yin Yang Sunflower coasters. The tray is 35.5 cm (14") wide and 8 mm (1/3") thick. 

The tray is also in a 10" (M) version available.

Silicone mold for 4 medium size Christmas Angels. Each Angel is 15 cm (6") tall and 6 mm (1/4") thick.

We have 4 more Christmas Angel molds available, with angels varying in size from 5 cm (2") to 20 cm (8"). Some of them are also available in a Druzy crystal or Holographic version.

Set of 4 silicone Holographic Inlay molds, with a Flower engraved into them. Each inlay mold is 12.5 cm wide and appr. 3 mm (1/8") thick and they fit perfectly in our 15 cm (6") round molds (geode style, ribbed edge and basic round mold). 

The holographic color effect will transfer to the surface of your resin piece. Please be aware that when you pour a finishing (top) layer over the holographic piece, the holographic effect will be gone! We therefore advise not to use a top coat.

Silicone mold for 9 extra small engraved Gingerbread men. The Gingerbread men are 7.5 cm (3") tall and 6 mm (1/4") thick.

We have 2 more molds available, with Gingerbread men of 10 cm (4") and 20 cm (8") tall.

Two silicone molds for a medium size and a large Trinket Dish. The medium Trinket Dish is 12.5 x 25 cm (5" x 10") wide and the large Trinket Dish is 15 x 30 cm (6" x 12") wide.

Both Trinket Dishes have two layers, the baselayer is 8 mm (1/3") thick and the raised edge is 6 mm (1/4") high. The dishes are in total 14 mm (just over 1/2") thick.

The raised edge of each dish is along the entire side 5 mm (1/5") narrower than the baselayer, giving the Trinket Dish an elegant appearance!

The molds are also available separately.

Silicone mold for a Holographic Tealight Candle Holder with Rudolph the Red Nosed Reindeer. The backpanel is 10 x 10 cm (4" x 4") and the holder is 6 mm (1/4") thick. The maximum cupsize is 41 mm (1 3/5"), the recess for the cup is about 3 mm (1/10") deep. Rudolph is raised on the surface.

The candle holder is made of two parts, fixed together with a finger joint connection and a few drops of glue, or epoxy, are sufficient for a permanent connection.

We tested the candle holder with a standard burning tealight, without any issues of overheating. It's always a good idea though, to place 4 small rubber feet under the holder, so that air can flow under the tealight.

We have 10 more models in our collection, some with Druzy crystal shapes, some with Holographic features (with or without decorative corners) and one basic model, without any decoration. A few of them are pictured in their finished state.