Alle Formen

Silicone inlay mold with an engraved Mandala. The mold is 24 cm (9 2/5 ") wide and appr. 4 mm (1/6") thick, with a straight edge.

The thickness of this inlay mold makes it easy to create a tray with raised edge, by using a larger and deeper round(ish) mold, for instance our 25 cm (10") or 35 cm (14") large disc molds.

We have several other engraved Mandala inlay molds of 24 cm (9 2/5") available, see the pictures for a few (for illustrative purposes, this item is only for Mandala #3).

Silicone mold for 2 medium size Christmas Ornaments with a Gingerbread House. Each house is 13.5 cm (5 1/4") high, 15 cm (6") wide and 8 mm (1/3") thick.

We also have 4 other molds with the same Gingerbread House available, varying in size from 7.5 cm (3") to 25 cm (10").

Silicone mold for 2 medium size Christmas Ornaments with a Happy Santa Claus. Santa is 15 cm (6") high and 8 mm (1/3") thick.

We also have 4 other Happy Santa molds available, varying in size from 7.5 cm (3") to 25 cm (10").

Silicone mold for an Art panel, titled Diagonal Tubes. The panel is 20 x 20 cm (8"x 8") wide and can maximum be 19 mm (3/4") thick. 

!! ATTENTION: this mold doesn't have a glossy finish. Use it therefore with Jesmonite, Jesin, A1 and similar products that consist of water-based acrylic hardeners in combination with mineral powders. Pouring with resin will not result in a shiny (glossy) panel, it will have a matte finish.

We also have another, similar, Tubes mold avalable, but then with parallel tubes. both molds are also available as a set, for a special setprice.

Two silicone molds for:

• a set of four oval coasters with a 'Wild Water' effect on the surface. The coasters are 12.5 x 9.5 cm (5" x 3 3/4") wide and 9 mm (1/3") thick.
• a large Oval tray with a 'Wild Water' effect on the surface. The tray is 28 x 19 cm (11" x 7 1/2") wide and 9 mm (1/3") thick.

Both molds are also available separately.

Add an artistic touch to your home with thesese 2 'Wild Water' molds. Create unique coasters and a large tray that are sure to make a splash with their wild water effect. Be bold and unleash your creativity with this ocean-inspired set.

Silicone mold for a large Oval tray with a 'Wild Water' effect on the surface. The tray is 28 x 19 cm (11" x 7 1/2") wide and 9 mm (1/3") thick.

Crafted with a creative and unique design resembling wild water, the oval tray that you create with this mold captures the wild energy of the sea in a powerful, artistic way. Bring out your inner artist, unleash your creative and artistic talents and create for instance a piece of Ocean art that resembles rough seas. An adventure for your imagination!

Set of two silicone molds for our trays with the Oriental theme. The trays are 20 cm (8") and 25 cm (10") wide and 8 mm (1/3") thick.

These two molds are part of our molds with the Oriental theme, which further consists of a coaster mold, a coaster holder mold, a smaller tray, a larger tray and a set of 8 medallions.

Some of these molds are also in a set of 2 or 3 molds available, for special setprices.

Silicone mold for a large Halloween tray, featuring a Spiderweb, with a huge Spider crawling around!

The tray is 30 cm (12") wide and 8 mm (1/3") thick. The Big Web is 0.75 mm thick and it will be raised on the surface of the tray.

There is also a mold available for 4 Spiderweb coasters and both molds are also as a set available, see one of the pictures (for illustrative purposes, this item is only for the spiderweb tray mold).

Silicone mold for a large Pumpkin tray. The tray is 28 cm (11") wide, 27 cm (10 2/3") tall and 8 mm (1/3") thick.

There is also a mold available for 4 Pumpkin coasters and both molds are also as a set available, see one of the pictures (for illustrative purposes, this item is only for the pumpkin tray mold).

Silicone mold for two Intertwined Hearts. The hearts are 6 mm (1/4) thick and together they are 26.5 cm (10 2/5") wide and 19.5 cm (7 2/3") tall.

This mold is also available in a Holographic version.

Silicone mold for a large Cute Christmas tray. The tray is 30 cm (12") wide and 8 mm (1/3") thick.

The tray features the same Christmas figures as in the cute Christmas coasters, coaster holder and in the mold for 12 cute Christmas ornaments.

We also have a set of 3 molds available with this tray mold, the coaster mold and the coaster holder mold, see one of the pictures (for illustrative purposes, this item is only for the tray mold).

Silicone mold for a large tray with the Lily Mandala engraved into it. The tray is 25 cm (10") wide and 8 mm (1/3") thick.

The tray mold is part of our Lily Mandala line, in which besides this mold are also molds available for a set of 4 coasters, a coaster holder and a set of 8 medallions, as shown in one of the pictures (for illustrative purposes, this item is only for the tray mold).

Silicone mold for a set of four coasters, engraved with the Lily Mandala. The coasters are 11.5 cm (4 1/2") wide and 8 mm (1/3") thick.

This holder mold is part of our Lily Mandala line, in which besides this mold are also molds available for a coaster holder, a set of 8 medallions and a tray of 25 cm (10"), as shown in one of the pictures (for illustrative purposes, this item is only for the coaster mold).

The coaster mold and holder mold are also as a set available, for a special setprice.

Silicone mold for an extra large Geode tray with Crushed Ice effect. The tray is 35 cm wide (14") and has a raised edge.

There is also a mold for an identical smaller tray, which is 25 cm wide (10"), and a set of Geode coasters with the same Crushed Ice effect and raised edges, see the pictures (for illustrative purposes, this item is only for the XL tray mold).

Set of 2 silicone molds for:

• four Poppy-shaped Coasters. The coasters are 12 cm (4 3/4") wide, 9 cm (3 1/2") high and 8 mm (1/3") thick.
• a large Poppy-shaped Flower Tray. The tray is 25 cm (10") wide, 18.5 cm (7 1/4") high and 8 mm (1/3") thick.

The petals of the Poppies are delicately engraved.

Double the Poppy Power, double the fun! This beautiful matching set is perfect for creating a coordinated look for your table, gift set, or resin art collection. Whether you go full floral or mix and match colors and styles, this duo is made for creative freedom. And the best part? You’ll save with our special set price! Let your ideas bloom and create your own wildflower wonderland.

We also have two other Poppy molds available, one for a medium size tray and one for 9 Poppy ornaments with keychain holes.

Silicone mold for a Halloween (Wall) Sign - 'Trick or Treat'. The sign is 30 cm (12") wide, 15.5 cm (6") high and 8 mm (1/3") thick. The raised decorative pattern, including the text, is 1 mm thick.

The sign has two large holes for a cord or ribbon.

Silicone mold for a large standing Gingerbread Man. The figure is 22.5 cm (8 9/10") high and 2.5 cm (1") thick, excluding the raised pattern of 2 mm.

Add some festive cheer to your home with a Standing Gingerbread Man! Perfect for adding a touch of Christmas spirit to your table, dresser or windowsill, this jolly little guy will bring a smile to your face. Plus, he doubles as a charming holiday decoration. Be creative, get this mold and make your own now!

!! ATTENTION: this mold doesn't have a glossy finish. Use it therefore with Jesmonite, Jesin, A1 and similar products that consist of water-based acrylic hardeners in combination with mineral powders. Pouring with resin will not result in a shiny (glossy) Gingerbread man, it will have a matte finish.

Silicone mold for a thick square block. The block is 15 x 15 cm (6" x 6") wide, 8 cm (3 1/6") thick and the mold has a smooth and shiny finish. This square mold is very suitable for your deep pour projects.

To add extra strength to the walls of the mold, we supply 4 side panels that can be easily assembled (random color, chosen by us).

And because creating a beautiful piece of art with a deep pour mold often takes several days, dust can easily get into your work in progress. Therefore we also include a convenient lid for your mold (random color, chosen by us).

Enjoy your deep pour.

Silicone mold for an Art panel, titled Botanicum. The panel is 20 x 20 cm (8"x 8") wide and 15 mm (3/5") thick. 

Add an artistic touch to your interior with our 'Botanicum' Wall Art Panel. Perfect for elevating any interior (wall) decoration, this mold allows you to unleash your creative side. Don't settle for boring walls, express yourself and create a unique addition to your home!

!! ATTENTION: this mold doesn't have a glossy finish. Use it therefore with Jesmonite, Jesin, A1 and similar products that consist of water-based acrylic hardeners in combination with mineral powders. Pouring with resin will not result in a shiny (glossy) panel, it will have a matte finish.

We  also have other molds available to create (wall) Art panels, some of them are shown in one of the pictures (for illustrative purposes, this item is only for the 'Botanicum' mold). These panels all have the same width of 20 x 20 cm and thickness may vary.

Silicone mold for a medium size Scallop with a 'Wild Water' effect on the surface. The scallop is 24 x 20 cm (9 1/2" x 8") wide and 9 mm (1/3") thick.

Crafted with a creative and unique design resembling wild water, the  scallop that you create with this mold captures the wild energy of the sea in a powerful, artistic way. Bring out your inner artist, unleash your creative and artistic talents and create for instance a piece of Ocean art.

Silicone mold for a large Cascade Roman tray. The tray is 25 cm (10") wide and 9 mm (1/3") thick. 

The tray is made up of three layers of 3 mm each. Each layer is slightly smaller than the previous layer, which gives the sides of the tray a unique cascade-like appearance.

There is also a Roman coaster mold available with the same cascade design, see one of the pictures (for illustrative purposes, this items is only for the tray mold). Both molds are also available as a set, at a special price.

Silicone mold for a Decorative Christmas ornament with a beautiful Curls design. The ornament is 15 cm (6") tall, 11 cm (4 1/3") wide and 6 mm (1/4") thick. The Curls design is 0.75 mm thick and it will be raised on the surface of the ornament.

We have 2 more Decorative ornament molds of the same size available, one with a Christmas tree and one with a Snowflake, see one of the pictures (for illustrative purposes, this item is only for the Decorative Curls mold). The three ornament molds are also as a set of 3 molds available, for a special setprice.