Sortiere nach:
620 Produkte
620 Produkte
Four silicone inlay molds for Hexagon coasters. The molds measure 9 cm (3 1/2") from side to opposite side and they are a perfect match for our mold for 10 cm (4") Hexagon coasters. And because the inlay molds are appr. 4 mm (1/6") thick, your result will be a Hexagon coaster with a raised edge and a beautiful engraved surface.
We also have a few other Hexagon inlay molds available with a different pattern, see one of the pictures.
Silicone inlay mold with an engraved Mandala. The mold is 24 cm (9 2/5 ") wide and appr. 4 mm (1/6") thick, with a straight edge.
The thickness of this inlay mold makes it easy to create a tray with raised edge, by using a larger and deeper round(ish) mold, for instance our 25 cm (10") or 35 cm (14") large disc molds.
We have several other engraved Mandala inlay molds of 24 cm (9 2/5") available, see the pictures for a few (for illustrative purposes, this item is only for Mandala #1).
Set of 3 molds - pizza Geode coasters with holder and round tray
Set of 3 molds - pizza Geode coasters with holder and round tray
- The rectangular sides of the coasters are 12,5 cm (5") long and they are 8 mm (1/3") thick.
- The tray is 25 cm (10") wide and 10 mm (2/5") thick.
- The base plate of the holder is 8 mm (1/3") thick and there are two supports to keep the coasters in place. They can be attached to the base plate with glue or with a few drops of resin. And they can also be fixed in a final resin layer. The supports are 40 mm (1 3/5") tall and a paper template will be supplied to position them exactly.
3 Silicone molds for Halloween Bat Hangers:
- a small Bat Hanger, which is 20 cm (8") wide and 8 cm (3 1/4") high.
- a medium size Bat Hanger, which is 25 cm (10") wide and10 cm (4") high.
- a large Bat Hanger, which is 35 cm (12") wide and 12.5 cm (5") high.
The bats are 8 mm (1/3") thick and they have a raised decorative pattern, which is 1 mm thick.
The three molds are also available separately.
Silicone mold for a large Magical Potion Bottle with a Rose and Skull! The bottle is 12 cm (4 3/4") wide, 25.5 cm (10") high and 8 mm (1/3") thick. The raised decorative pattern has a thickness of 1 mm.
We also have molds available for three other large Magical Potion bottles.
Silicone mold for a large Magical Potion Bottle with a Scary Pumpkin! The Potion bottle is 13 cm (5") wide, 25.5 cm (10") high and 8 mm (1/3") thick. The raised decorative pattern has a thickness of 1 mm.
We also have molds available for three other large Magical Potion bottles.
Silicone mold for 8 Halloween Bats keychains. The bats are 12 cm (4 2/3") wide, 5.3 cm (2") high and 6 mm (1/4") thick.
Four of the bats have a keyring hole in their right wing and the other four have a keyring hole in their left wing.
Silicone mold for a large Christmas Tray - 'Happy Santa Claus'. Santa is 25 cm (10") high, 19.5 cm (7 2/3") wide and 8 mm (1/3") thick.
We also have 4 other Happy Santa (ornament) molds available, varying in size from 7.5 cm (3") to 20 cm (8").
Silicone mold for a large Magical Potion Bottle, guarded by a huge Spider! The bottle is 12.5 cm (5") wide, 25.5 cm (10") high and 8 mm (1/3") thick. The raised decorative pattern has a thickness of 0.75 mm.
A magical potion bottle, guarded by a huge terrifying spider! This mold is perfect for creating your own unique Halloween decoration. Get ready to brew up something magical and add a frightning touch to your home, but don't let the spider get you in his web!
We also have molds available for three other large Magical Potion bottles.
Silicone mold for an elegant pillar. The pillar is 5 x 5 cm (2" x 2") wide, 8 cm (3 1/6") thick and it has faceted edges on all 4 sides. This mold is very suitable for smaller deep pour projects.
To add extra strength to the walls of the mold, we supply 4 side panels that can be easily assembled (random color, chosen by us).
And because creating a beautiful piece of art with a deep pour mold often takes several days, dust can easily get into your work in progress. Therefore we also include a convenient lid for your mold (random color, chosen by us).
Two silicone molds for:
- 4 square coasters with a rough tumbled marble look and feel. The coasters are 10 x 10 cm (4" x 4") wide and 1 cm (2/5") thick.
- a square tray with a rough tumbled marble look and feel. The tray is 20 x 20 cm (8" x 8") wide and 1 cm (2/5") thick.
!! ATTENTION: these molds don't have a glossy finish. Use them therefore with Jesmonite, Jesin, A1 and similar products that consist of water-based acrylic hardeners in combination with mineral powders. Pouring with resin will not result in a shiny (glossy) set of coasters and tray, they will have a matte finish.
The molds are also available separately.
Silicone mold for 4 square coasters with a rough tumbled marble look and feel. The coasters are 10 x 10 cm (4" x 4") wide and 1 cm (2/5") thick.
!! ATTENTION: this mold doesn't have a glossy finish. Use it therefore with Jesmonite, Jesin, A1 and similar products that consist of water-based acrylic hardeners in combination with mineral powders. Pouring with resin will not result in a shiny (glossy) set of coasters, they will have a matte finish.
We also have two molds available for a square tumbled marble tray (20 x 20 cm and 30 x 30 cm), see one of the pictures (for illustrative purposes, this item is only for the tumbled marble coasters mold).
Silicone mold for a set of eight decorative (napkin ring) medallions, with our Magical shape. Each medallion is 5.5 cm (2 1/6") wide and 8 mm (about 1/3") thick.
This medallion mold can be used together with our mold for the (napkin) rings, which is especially designed to form the base for these medallions. Together they make a unique napkin ring.
This mold is one of our molds with the Magical theme, which further consists of a coaster mold, a coaster holder mold and 4 trays, see one of the pictures (for illustrative purposes, this item is only for the medallion mold).
Some of these molds are also in a set of 2 or 3 molds available, for special setprices.
Silicone mold for a Holographic holder for 4 (holographic) Fantasy coasters. The holder has a holographic color effect, which will transfer to the surface of your resin coaster holder.
The holder mold is also available in a normal version, without the holographic effect.
This holder is a perfect match for the Holographic Fantasy coasters, see one of the pictures (for illustrative purposes, this item is only for the holographic holder mold). Both holographic molds are also as a set of 2 molds available, for a special setprice.
The legs of the holder are 42 mm (1 2/3") tall and you insert them from the bottomside through the slots of the base plate. You can fix the legs with a drop of glue or (UV) resin so that it becomes a solid piece (Tip: place the holder upside down, so that the legs will hang vertically while the glue or resin is drying).
Note: do not apply too thick a dome layer on the legs, because then they will no longer fit through the slots.
Silicone mold for a clock with Funny Numbers, a wall clock with a diameter of 30 cm (12") and 6 mm (1/4") thick. The center hole for the movement is 8 mm (1/3") wide. The mold is mirrored, which means that you look at the backside of the clock.
The clock has two layers, the face of the clock is about 0.75 mm above the background. That's funny!
Silicone mold for 26 letter medallions. The medallions are flower shaped, they have a decorative engraving and each letter has an engraved border, which makes it pop out beautifully. The medallions are 5 cm (2") wide, 6 mm (1/4") thick and you can for instance make personalized phone grips, fridge magnets, napkin medallions, keyring tags and holiday decorations with them.
As a bonus we added the same engraved flower in the center of the mold, it is about 11 cm (4 1/3") large.
There is also a similar mold available that is holographic and has keyring holes in the medallions.
Set of 5 Crushed Ice Inlay molds (Island with round molds)
Set of 5 Crushed Ice Inlay molds (Island with round molds)
Set of 5 silicone inlay molds with the Crushed Ice pattern. The 'Island' mold is 15.5 x 21 cm (6" x 8 1/4") at the widest parts and the round inlay molds are 8 cm (3 1/6").
All molds are about 4 mm (1/6") thick and the round molds will fit in (almost) any coaster mold.
NOTE: the longer protrusions of the base plate must be at the rear.
Silicone mold for a large Trinket dish, shaped as a Halloween Ghost! The trinket dish is 19.5 cm (7 1/2") wide, 22.5 cm (8 9/10") high and 18 mm (7/10") thick, including a raised edge of 8 mm (1/3").
Get into the Halloween spirit with this Spooky Trinket Dish! Made by yourself using this silicon mold, the dish will be perfect for storing your Halloween treats or adding a touch of spookiness to your décor. Embrace the spooky spirit all year round!
!! ATTENTION: this mold doesn't have a glossy finish. Use it therefore with Jesmonite, Jesin, A1 and similar products that consist of water-based acrylic hardeners in combination with mineral powders. Pouring with resin will not result in a shiny (glossy) trinket dish, it will have a matte finish.
Silicone mold for a decorative Halloween shield with a Tombstone Zombie! The shield is 17 cm (6 2/3") wide, 25 cm (10") high and 8 mm (1/3") thick. The decorative design is 0.75 mm thick and it will be raised on the surface of the shield.
Get ready to spookify your house with a scary Halloween shield, created by yourself! This unique shield will turn your frontdoor or porch into a spooky entrance with its tombstone and zombie design. Trick-or-treaters beware!
We also have 3 other molds available for a Halloween shield, all with their own decorative design.
Silicone mold for an XL round Trinket Dish. The Trinket Dish has a diameter of 28 cm (11") and it has two layers. The baselayer is 8 mm (1/3") thick and the raised edge is 6 mm (1/4") high. The dish is in total 14 mm (just over 1/2") thick.
The raised edge is along the entire disc 5 mm (1/5") narrower than the baselayer, giving the dish an elegant appearance!
There are also molds for two smaller round Trinket Dishes available, see one of the pictures (for illlustrative purposes, this item is only for the XL round Trinket Dish). The three molds are also available in sets of two or three, for special setprices.
Angezeigt werden 456/620