Alle Formen

Silicone mold for 10 Cute Halloween Keychain Ornaments. The ornaments are between 3.5 cm (1 2/5") and 8 cm (3 1/7") high. They are 6 mm (1/4") thick.

A playful collection of ten Halloween characters, perfect for creating cute rather than creepy seasonal decorations. From the smiling cauldron and little mummy to the black cat, bat and friendly ghost, every design has its own charming personality. Experiment with bright colours, glow-in-the-dark pigments, glitter or spooky layered effects.

Turn them into keychains, bag charms, hanging ornaments or fun little Halloween gifts.

Silicone mold for 2 large Cup 2 Go Trays. The Cups are 18 cm (7") tall, 12 cm (4 3/4") wide and 8 mm (1/3") thick.

Bigger, bolder, barista vibes! This silicone mold creates two large Cup 2 Go designs, standing 18 cm tall each. Ideal for statement pieces, coffee-themed decor, or as a fun resin art gift. Each cup features an engraved sleeve with either a heart or a circle in the center, perfect for personalizing with names, quotes or logos. Whether you're a coffee lover or a craft show seller, these bold cups are a great way to stand out from the crowd. Not suitable as keychains, just too good to stay small.

We also have a mold available for 9 Cup 2 Go keychains, as seen in one of the pictures (for illustrative purposes, this item is only for the large Cup 2 Go trays mold.

Silicone mold for a large Christmas Tray - 'Happy Santa Claus'. Santa is 25 cm (10") high, 19.5 cm (7 2/3") wide and 8 mm (1/3") thick.

We also have 4 other Happy Santa (ornament) molds available, varying in size from 7.5 cm (3") to 20 cm (8").

Silicone mold for a 3D Lion head. The head is 18 cm (7") wide and 30 mm (1 1/5") thick.

"Unleash the king of the jungle! 🦁

Craft a truly fierce masterpiece with this mold of a bold lion head. With its strikingly intimidating expression and 3 cm depth, this glossy mold is perfect for creating stunning decor pieces. Whether you’re working with Jesmonite or resin, this mold ensures a jaw-dropping result every time. Let your creativity roar!"

Silicone mold for a handsome dog, called George. George is 25 cm (10") wide and 20 cm (8") high. He is also 2.5 cm (1") thick, which means that George can easily stand on its own feet.

Unleash your creativity with this adorable dog mold! Standing tall and proud at 2.5 cm thick, this mold is perfec to use with Jesmonite, Jesin and similar creative materials. And whether you call him George or give him some other nice name, your handcrafted dog will sit pretty on any shelf or desk!

By the way, George has a playmate, a sweet cat, and they get along very well, as shown in one of the pictures (for illustrative purposes, this item is only for the dog mold).

!! ATTENTION: this mold doesn't have a glossy finish. Use it therefore with Jesmonite, Jesin, A1 and similar products that consist of water-based acrylic hardeners in combination with mineral powders. Pouring with resin will not result in a shiny (glossy) dog, it will have a matte finish.

Silicone mold for 2 large engraved Gingerbread men. The Gingerbread men 20 cm (8") tall and 6 mm (1/4") thick.

We have 2 more molds available, with Gingerbread men of 7.5 cm (3") and 10 cm (4") tall.

Three silicone molds for Decorative Christmas ornaments, one with a Christmas tree, one with a Snowflake and one with a Curls design. Each ornament is 15 cm (6") tall, 11 cm (4 1/3") wide and 6 mm (1/4") thick. The decorative pattern on the ornaments are 0.75 mm thick and they will be raised on the surface of the ornaments.

The molds are also available separately.

Silicone mold for a Square tray of 20 x 20 cm (8" x 8") wide and 1 cm (2/5") thick.

We also have a square mold available in 25 x 25 cm (10" x 10") and 30 x 30 cm (12" x 12").

Three silicone molds for:

• a set of 4 Heart shaped coasters. The coasters are 14.5 cm (5 7/10") wide. 13.5 cm (5 1/3") tall and 8 mm (1/3") thick.
• a mold that can be used to make a holder for the coasters and also a small Heart shaped tray. The heart is 18 cm (7") wide, 17 cm (6 3/4") tall and 8 mm (1/3") thick.
  The two small hearts are meant to be used as stands on the tray, to create a holder for the heart shaped coasters and they can for instance be fixed with glue, resin or in a toplayer.
• a large Heart shaped tray. The tray is 30 cm (12") wide, 27.8 cm (11")  tall and 8 mm (1/3") thick.

All molds are also available separately.

Silicone mold for a holographic holder for 4 round coasters of 8 mm (1/3") thick. The holder is suitable for every round coaster with a diameter of 10 cm (4"), but it's especially meant for our holographic round coasters, for which we have a mold available separately.

The legs of the holder have a holographic finish too, they are 40 mm (1 3/5") tall and you insert them from the bottomside through the slots of the 6 mm (1/4") thick base plate. You can fix the legs with a drop of glue or (UV) resin, so that it becomes a solid piece (Tip: place the holder upside down, so that the legs will hang vertically while the glue or resin is drying).

Note: do not apply too thick a dome layer on the legs, because then they will no longer fit through the slots.

Silicone mold for a Tealight Candle Holder with a Holographic Fireplace. The backpanel is 10 x 10 cm (4" x 4") and the holder is 6 mm (1/4") thick. The maximum cupsize is 41 mm (1 3/5"), the recess for the cup is about 3 mm (1/10") deep. The cosy and colorful fire is raised on the surface.

The candle holder is made of two parts, fixed together with a finger joint connection and a few drops of glue, or epoxy, are sufficient for a permanent connection.

We tested the candle holder with a standard burning tealight, without any issues of overheating. It's always a good idea though, to place 4 small rubber feet under the holder, so that air can flow under the tealight.

We have 10 more models in our collection, some with Druzy crystal shapes, some with Holographic features (with or without decorative corners) and one basic model, without any decoration, see the pictures. A few of them are pictured in their finished state.

Silicone mold for a telephone stand. The stand is 6 mm ( 1/4") thick and the space above the edge is 80 mm (3 3/5") wide and 130 mm (5 1/10") high.

The same mold is also available in a holographic version, see one of the pictures (for illustrative purposes, this item is only for the non-holographic mold).

There is also a mold available for an XL telephone stand, which is a good match for the larger (smart)phones. One of the pictures shows the size difference between the two stands.

Silicone mold for 8 Halloween Bats keychains. The bats are 12 cm (4 2/3") wide, 5.3 cm (2") high and 6 mm (1/4") thick.

Four of the bats have a keyring hole in their right wing and the other four have a keyring hole in their left wing.

Silicone mold for 6 small Christmas Ornaments with a Happy Santa Claus. Each Santa is 10 cm (4") high and 6 mm (1/4") thick.

We also have 4 other Happy Santa molds available, varying in size from 7.5 cm (3") to 25 cm (10").

Silicone mold for a large Holographic Oriental tray. The tray is 28 cm (11") wide and 8 mm (1/3") thick.

The mold has a holographic color effect, which  will transfer to the surface of your resin artwork.

We also have holographic Oriental molds available for coasters and a coaster holder, as seen in one of the pictures (for illustrative purposes, this item is only for the holographic Oriental tray mold).

We also have Oriental trays available in a normal version, without the holographic color effect.

Silicone mold for a medium size round Trinket Dish. The Trinket Dish has a diameter of 18 cm (7") and it has two layers. The baselayer is 8 mm (1/3") thick and the raised edge is 6 mm (1/4") high. The dish is in total 14 mm (just over 1/2") thick.

The raised edge is along the entire disc 5 mm (1/5") narrower than the baselayer, giving the dish an elegant appearance!

There are two larger round Trinket Dishes available, see one of the pictures (for illlustrative purposes, this item is only for the medium size round Trinket Dish). The three molds are also available in sets of two or three, for special setprices.

Set of 2 silicone molds for 4 Cascade Roman coasters with a matching large tray. The coasters are 11 cm (4 1/3") wide and 9 mm (1/3") thick. The tray is 25 cm (10") wide and also 9 mm (1/3") thick. 

The coasters and tray are made up of three layers of 3 mm each. Each layer is slightly smaller than the previous layer, which gives the sides of the coasters and tray a unique cascade-like appearance.

We also have other molds available with the layered Cascade design.

Silicone mold for a large Cascade Daisy tray. The tray is 26 cm (10 1/4") wide and 9 mm (1/3") thick. 

The tray is made up of three layers of 3 mm each. Each layer is slightly smaller than the previous layer, which gives the sides of the tray a unique cascade-like appearance.

There is also a Daisy coaster mold available with the same cascade design, see one of the pictures (for illustrative purposes, this items is only for the tray mold). Both molds are also available as a set, at a special price.

Silicone mold for a Christmas ornament with a Druzy Crystal Christmas bell. The ornament is 15 cm (6") tall, 11 cm (4 1/3") wide and 6 mm (1/4") thick.

We have 2 more Druzy Crystal ornament molds of the same size available, one with a Christmas tree and one with a Christmas star, see one of the pictures (for illustrative purposes, this item is only for the Crystal Christmas bell mold). The three ornament molds are also as a set of 3 molds available, for a special setprice.

Silicone mold for a Christmas ornament with a Druzy Crystal Christmas star. The ornament is 15 cm (6") tall, 11 cm (4 1/3") wide and 6 mm (1/4") thick.

We have 2 more Druzy Crystal ornament molds of the same size available, one with a Christmas tree and one with a Christmas bell, see one of the pictures (for illustrative purposes, this item is only for the Crystal Christmas star mold). The three ornament molds are also as a set of 3 molds available, for a special setprice.

Set of 4 silicone Holographic inlay molds, in the shape of a heart. Each heart is 13.3 cm (5 1/4") wide, 11.8 cm (4 2/3") tall and appr. 5 mm (1/5") thick.

These inlay molds are especially designed for our heart shaped coaster mold, which is available separately. Because the inlay molds are appr. 5 mm thick, the result will be a heart shaped coaster with a raised edge.

The molds have a holographic color effect, which  will transfer to the surface of your resin hearts. Please be aware that when you pour a finishing (top) layer over the holographic piece, the holographic effect will be gone! We therefore advise not to use a top coat.

Double, double toil and trouble, fire burn and cauldron bubble! (William Shakespeare)

Silicone mold for a large Whitch's Cauldron tray. The tray is 30 cm (12") wide, about 24 cm (9 1/3") high and 8 mm (1/3") thick. The Cauldron will be beautiful as Halloween decoration, for instance on a (front)door or wall.

There is also a mold available for 4 Whitch's Cauldron coasters. And both molds are also as a set available, see one of the pictures (for illustrative purposes, this item is only for the large Cauldron tray mold).

Silicone mold for 6 Holographic Christmas Bell ornaments, with holes for a ribbon or cord. Each bell is 10 cm (4") wide and high, 6 mm (1/4") thick and they have a holographic color effect, that will transfer to the surface of your resin Christmas ornaments.

We also have a mold available for the same ornaments, but then without the holographic color effect.